CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE
INSTALL SEAT COVER WIRE
INSTALL SEPARATE TYPE FRONT SEATBACK COVER
Tech Tips
When installing a separate type front seatback cover, refer to Precaution in order to prevent wrinkles from forming.
| *a | Hog Ring Pliers |
for Standard Seat Type:
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 10 new hog rings in the order indicated in the illustration.
Note
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
| *a | Fastening Tape |
| *b | Hog Ring Pliers |
for Sports Seat Type:
Attach the fastening tape.
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 10 new hog rings in the order indicated in the illustration.
Note
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
| *a | Fastening Tape |
| *b | Hog Ring Pliers |
w/ Front Passenger Side Folding Headrest:
Pull out the strap of the separate type front seatback cover out of the hole of the separate type front seat cushion pad and attach the fastening tape.
Using hog ring pliers, install 6 new hog rings securely.
Note
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
except Front Passenger Side Folding Headrest:
| *a | Hog Ring Pliers |
Pull out the strap of the separate type front seatback cover out of the hole of the separate type front seat cushion pad.
Using hog ring pliers, install 4 new hog rings securely.
Note
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
INSTALL FRONT SEATBACK BOARD
INSTALL FRONT SEAT HEADREST ASSEMBLY
INSTALL FRONT INNER SEAT CUSHION SHIELD LH
INSTALL FRONT SEAT CUSHION SHIELD LH
INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH
INSTALL FRONT POWER ADJUSTER SHIELD LH
INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Seat)
INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Seat)
INSTALL FRONT SEAT ASSEMBLY
PERFORM DIAGNOSTIC SYSTEM CHECK
CHECK SRS WARNING LIGHT
PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK (for Front Passenger Side with Occupant classification System)
INSPECT SEAT BELT WARNING SYSTEM
w/ Occupant Classification System:
w/o Occupant Classification System:
INSPECT FRONT SEAT ASSEMBLY
INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)
INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)