FRONT SEAT ASSEMBLY(for Manual Seat) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The following procedure is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE OCCUPANT DETECTION ECU (w/ Occupant Classification System)

    Click here

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

    Click here

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

    Click here

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. B0084SN

      Disconnect the rubber band of the separate type front seatback cover.

  5. REMOVE VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)


    1. B00851SC01
      *a Protective Tape
      B00847Z Remove in this Direction

      Operate the vertical adjusting handle and using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the vertical adjusting handle as shown in the illustration.

  6. REMOVE RECLINING HINGE COVER


    1. B0087VOC01
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

    2. Disengage the guide to remove the reclining hinge cover.

  7. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    1. B0087ZE

      Remove the reclining adjuster release handle.

  8. REMOVE SEAT ADJUSTER COVER CAP (w/ Vertical Adjuster)


    1. B0087WVC01
      *a Protective Tape
      B00847Z Remove in this Direction (1)
      B008776 Remove in this Direction (2)

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws as shown in the illustration.

    2. Disengage the 2 guides to remove the seat adjuster cover cap as shown in the illustration.

  9. REMOVE FRONT SEAT CUSHION SHIELD (w/o Vertical Adjuster)


    1. B00881W

      Disengage the 2 claws.

    2. B008705

      Disengage the claw and 2 guides.

    3. B00846MC01
      *a Protective Tape
      B00847Z Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and slightly pull the front seat cushion shield as shown in the illustration.

    4. B0087PQC01
      B00847Z Remove in this Direction

      Disengage the guide to remove the front seat cushion shield as shown in the illustration.

    5. w/ Lower Seat Track Spacer:


      1. B00857G

        Disengage the claw and guide to remove the lower No. 3 seat track spacer from the front seat cushion shield.

  10. REMOVE FRONT SEAT INNER CUSHION SHIELD (w/o Vertical Adjuster)


    1. B00893L

      Disengage the 3 claws.

    2. B00889CC01
      B00847Z Remove in this Direction

      Disengage the 2 claws and 2 guides to remove the front seat inner cushion shield as shown in the illustration.

    3. w/ Lower Seat Track Spacer:


      1. B0087AZ

        Disengage the claw and guide to remove the lower No. 4 seat track spacer from the front seat inner cushion shield.

  11. REMOVE FRONT SEAT CUSHION SHIELD (w/ Vertical Adjuster)


    1. B0084NI

      Disengage the 2 claws.

    2. B00881G

      Disengage the claw and 2 guides.

    3. B00842JC01
      *a Protective Tape
      B00847Z Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and slightly pull the front seat cushion shield as shown in the illustration.

    4. B0085UQC01
      B00847Z Remove in this Direction

      Disengage the guide to remove the front seat cushion shield as shown in the illustration.

    5. w/ Lumbar Support:


      1. B00840E

        Disengage the 2 clamps.

      2. Disconnect the front lumbar power seat switch connector to remove the front seat cushion shield.

    6. w/ Lower Seat Track Spacer:


      1. B0087PO

        Disengage the claw and guide to remove the lower No. 1 seat track spacer from the front seat cushion shield.

  12. REMOVE FRONT LUMBAR POWER SEAT SWITCH (w/ Lumbar Support)

    Click here

  13. REMOVE FRONT SEAT INNER CUSHION SHIELD (w/ Vertical Adjuster)


    1. B0087U2

      Disengage the 2 claws.

    2. B0086ZIC01
      B00847Z Remove in this Direction

      Disengage the 2 claws and 2 guides to remove the front seat inner cushion shield as shown in the illustration.

    3. w/ Lower Seat Track Spacer:


      1. B00866M

        Disengage the claw and guide to remove the lower No. 2 seat track spacer from the front seat inner cushion shield.

  14. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. B00844K

      Disengage the 2 hooks.

    2. w/ Lumbar Support:


      1. B0085C0

        Disconnect the connector.

      2. Disengage the clamp.

    3. w/ Seat Heater System:


      1. B0085NI

        Disconnect the connector.

      2. Disengage the clamp.

    4. w/ Front Seat Side Airbag:


      1. B0083VC

        Disengage the claw and 4 clamps to separate the front seat airbag assembly wire harness.

        Tech Tips

        Disengage the 4 clamps first.

    5. B008519

      Remove the 4 bolts.

    6. Disengage the 4 guides to remove the separate type front seatback assembly from the separate type front seat cushion assembly.

  15. REMOVE FRONT SEAT HEADREST SUPPORT


    1. B00853A

      Disengage the 3 hooks.

    2. w/ Seat Heater System:


      1. B0087DP

        Disengage the clamp.

    3. B0089N8

      Open the 2 fasteners.

    4. w/o Rear Seat Belt Warning:


      1. B0089LCC01
        B00847Z Remove in this Direction

        Disengage the hook as shown in the illustration.

      2. B0084T9C01
        *1 Seatback Cover Hook
        *a Pin

        Pull up the pin of the seatback cover hook as shown in the illustration and remove the seatback cover hook.

      3. B0088LUC01
        *1 Seat Cover Hanger
        *a Bracket
        B00847Z Remove in this Direction

        Slide the bracket as shown in the illustration to disengage the hook and disconnect the bracket from the seat cover hanger.

    5. B00845R

      Disengage the 4 claws and remove the 2 front seat headrest supports.

  16. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Remove the separate type front seatback cover with pad.

  17. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. Using a screwdriver, disengage the 9 claws and remove the separate type front seatback cover from the separate type front seatback pad as shown in the illustration.

      B0089G7C01
      *a Screwdriver - -

  18. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)

    Click here

  19. REMOVE FRONT SEAT AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)

    Click here

  20. REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY (w/o Lumbar Support)


    1. B00867O

      Disengage the 2 claws to separate the 2 front seatback edge protectors from the front seatback frame sub-assembly.

    2. B0086W4C01
      B00847Z Remove in this Direction

      Remove the front seatback spring sub-assembly from the front seatback frame sub-assembly as shown in the illustration.

  21. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY RH (w/ Lumbar Support)

    Click here

  22. REMOVE FRONT SEATBACK EDGE PROTECTOR


    1. w/o Lumbar Support:


      1. Remove the 2 front seatback edge protectors from the front seatback spring sub-assembly.

    2. w/ Lumbar Support:


      1. Remove the 2 front seatback edge protectors from the lumbar support adjuster assembly RH.

  23. REMOVE FRONT NO. 2 SEATBACK HOOK


    1. B0083HH

      Remove the 2 front No. 2 seatback hooks from the front seatback frame sub-assembly.

  24. REMOVE FRONT SEAT NO. 2 WIRE (w/ Lumbar Support)


    1. B0086YJ

      Disengage the clamp to remove the front seat No. 2 wire.

  25. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. B0084S8C01
      B00847Z Remove in this Direction

      w/ Occupant Detection Sensor:


      1. Disengage the claw to separate the connector holder as shown in the illustration.

      2. B0086IPC01
        B00847Z Remove in this Direction

        Disengage the claw to remove the connector holder from the occupant detection sensor wire harness as shown in the illustration.

    2. w/ Seat Heater System:


      1. B0089D9

        Disconnect the connector and disengage the clamp.

    3. B0088TF

      Disengage the 2 hooks.

    4. Disengage the 10 hooks and remove the separate type front seat cushion cover with pad from the separate type front seat cushion spring assembly.

      B0084DQ

  26. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. Using a screwdriver, disengage the 14 claws and remove the separate type front seat cushion cover from the separate type front seat cushion pad as shown in the illustration.

      B008585C01
      *a Screwdriver - -

  27. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

    Click here

  28. REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER LH (w/ Vertical Adjuster)


    1. w/ Lumbar Support:


      1. B0084PZ

        Disengage the claw.

    2. B0084HI

      Disengage the 4 claws to remove the LH seat reclining adjuster inside cover LH.

  29. REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER RH (w/ Vertical Adjuster)


    1. B0086RP

      Disengage the 4 claws to remove the LH seat reclining adjuster inside cover RH.

  30. REMOVE RH SEAT RECLINING ADJUSTER INSIDE COVER LH (w/o Vertical Adjuster)


    1. B0083VX

      Disengage the 4 claws to remove the RH seat reclining adjuster inside cover LH.

  31. REMOVE RH SEAT RECLINING ADJUSTER INSIDE COVER RH (w/o Vertical Adjuster)


    1. B00841A

      Disengage the 4 claws to remove the RH seat reclining adjuster inside cover RH.

  32. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (w/ Vertical Adjuster)


    1. B008806C01
      *a Hook
      *b Guide

      Disengage the hook.

    2. Disengage the claw and guide to remove the front seat lower cushion shield LH.

  33. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (w/ Vertical Adjuster)


    1. B00866HC01
      *a Hook
      *b Guide

      Disengage the hook.

    2. Disengage the claw and guide to remove the front seat lower cushion shield RH.

  34. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

    Click here

  35. REMOVE FRONT SEAT WIRE RH (w/ Occupant Classification System)


    1. Disconnect each connector and disengage each clamp to remove the front seat wire RH.

  36. REMOVE FRONT SEAT WIRE RH (w/ Lumbar Support)


    1. Disconnect each connector and disengage each clamp to remove the front seat wire RH.

  37. REMOVE FRONT SEAT WIRE (w/ Seat Heater System)


    1. Disconnect each connector and disengage each clamp to remove the front seat wire.

  38. REMOVE FRONT SEAT CUSHION WIRE HARNESS HOLDER


    1. B0086OT

      Remove the 2 screws.

    2. Disengage the claw to remove the front seat cushion wire harness holder.

  39. REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY


    1. B0087TO

      Disengage the 6 hooks to remove the front seat cushion spring sub-assembly from the front seat adjuster assembly.

  40. REMOVE SEAT TRACK ADJUSTING HANDLE


    1. B00864F

      Disengage the 2 claws to remove the seat track adjusting handle from the front seat adjuster assembly.

  41. REMOVE FRONT SEAT VERTICAL ADJUSTER ASSEMBLY (w/ Vertical Adjuster)


    1. Remove the front seat vertical adjuster assembly.


      1. B0086G7

        Remove the 3 nuts and vertical adjuster plate.

      2. B0084WS

        Remove the vertical adjuster spacer.

      3. B0083R7

        Remove the front vertical adjuster brake sub-assembly.

  42. REMOVE VERTICAL ADJUSTER BRACKET COVER (w/ Vertical Adjuster)


    1. B0088TC

      Disengage the claw to remove the vertical adjuster bracket cover from the front vertical adjuster brake sub-assembly.