REAR BLOWER MOTOR INSTALLATION

PROCEDURE

1. INSTALL REAR BLOWER MOTOR WITH FAN SUB-ASSEMBLY

   
   

   1. Install the rear blower motor with fan sub-assembly with the 3 screws.

      Note

      Replace the rear blower motor with fan sub-assembly if it has been dropped or subjected to a severe impact.

   2. Connect each connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

   Click here

3. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

4. INSTALL ROPE HOOK ASSEMBLY

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

6. INSTALL REAR SEAT SIDE GARNISH RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

7. INSTALL FRONT DECK SIDE TRIM COVER RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

8. INSTALL REAR SEAT OUTER TRACK BRACKET COVER RH

   Click here

9. INSTALL REAR DOOR INSIDE SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

10. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

11. INSTALL REAR FLOOR FINISH PLATE

    Click here

12. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here