PROCEDURE
INSTALL ROOF HEADLINING ASSEMBLY
Install in this Direction |
Put the roof headlining assembly into the vehicle through the back door as shown in the illustration.
Note
Do not damage the roof headlining assembly or vehicle interior.
for Standard Roof:
Engage the 2 claws to install each base of the visor holder.
*A | w/ Digital Television Antenna | - | - |
*a | Base of Visor Holder | - | - |
Engage the 3 clips, 10 claws and 2 fasteners to install the roof headlining assembly.
w/ Digital Television Antenna:
Connect the connector.
for Sliding Roof:
Engage the guide.
*A | w/ Digital Television Antenna | - | - |
*a | Fastener | *b | Guide |
*c | Base of the Visor Holder | - | - |
Engage the 2 claws to install each base of the visor holder.
Engage the 3 clips, 10 claws and 8 fasteners to install the roof headlining assembly.
Connect each connector.
for Rear Pillar RH Side:
Connect each connector and the washer hose assembly.
Engage the 2 clamps.
for Front Pillar LH Side:
Remove the protective cover.
Connect the 3 connectors.
Engage the 4 clamps.
Install the protective cover.
for Front Pillar RH Side:
Remove the protective cover.
Connect the connector and washer hose assembly.
Engage the 3 clamps.
Install the protective cover.
for Windshield Glass Side:
Connect each connector.
INSTALL VISOR HOLDER LH
INSTALL VISOR ASSEMBLY LH
INSTALL VISOR BRACKET COVER LH
INSTALL VISOR HOLDER RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL VISOR ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL VISOR BRACKET COVER RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL ASSIST GRIP SUB-ASSEMBLY
INSTALL REAR ASSIST GRIP ASSEMBLY LH
Tech Tips
Use the same procedure as for the assist grip sub-assembly.
INSTALL REAR ASSIST GRIP ASSEMBLY RH
Tech Tips
Use the same procedure as for the assist grip sub-assembly.
INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)
INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)
INSTALL RAIN SENSOR (w/ Rain Sensor)
INSTALL RAIN SENSOR COVER (w/ Rain Sensor)
INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ Cover)
INSTALL SPOT LIGHT ASSEMBLY
INSTALL ROOF CONSOLE BOX ASSEMBLY
INSTALL REAR ROOF SIDE RAIL GARNISH ASSEMBLY LH
Install 3 new clips to the rear roof side rail garnish assembly LH.
Engage the 3 clips to install the rear roof side rail garnish assembly LH.
INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH
Install 10 new clips to the roof side inner garnish assembly LH.
Engage the 10 clips and 2 claws to install the roof side inner garnish assembly LH.
CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
Connect each connector.
Engage the 3 clips and 6 claws.
Install the deck trim side panel assembly LH with the 3 bolts and 2 clips.
INSTALL COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR
INSTALL NO. 2 AIR CONDITIONING CONTROL ASSEMBLY
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for LH Side)
INSTALL ROPE HOOK ASSEMBLY (for LH Side)
Install the rope hook assembly with the bolt.
Engage the 2 claws to close the cover as shown in the illustration.
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side)
INSTALL REAR SEAT SIDE GARNISH LH
for LHD:
Engage the 4 clips and 10 claws.
for RHD:
Connect the connector.
Engage the 4 clips and 10 claws.
Install the rear seat side garnish LH with the clip.
INSTALL FRONT DECK SIDE TRIM COVER LH
Engage the 2 guides and 2 claws to install the front deck side trim cover LH.
INSTALL REAR ROOF SIDE RAIL GARNISH ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
Engage the 3 clips and 6 claws.
Install the deck trim side panel assembly RH with the 2 bolts and 2 clips.
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for RH Side)
INSTALL ROPE HOOK ASSEMBLY (for RH Side)
Tech Tips
Use the same procedure as for the LH side.
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)
INSTALL REAR SEAT SIDE GARNISH RH
for LHD:
Connect the connector.
Engage the 4 clips and 10 claws.
for RHD:
Engage the 4 clips and 10 claws.
Install the rear seat side garnish RH with the clip.
INSTALL FRONT DECK SIDE TRIM COVER RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL REAR NO. 2 SEAT ASSEMBLY
INSTALL REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)
INSTALL REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)
INSTALL CENTER PILLAR GARNISH LH
CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
INSTALL LOWER CENTER PILLAR GARNISH LH
INSTALL REAR DOOR INSIDE SCUFF PLATE LH
Install in this Direction |
Engage the 2 guides and 8 claws to install the rear door inside scuff plate LH as shown in the illustration.
INSTALL REAR DOOR SCUFF PLATE LH
Engage the guide, 3 clips and 5 claws to install the rear door scuff plate LH.
INSTALL FRONT PILLAR GARNISH LH
INSTALL FRONT DOOR SCUFF PLATE LH
INSTALL CENTER PILLAR GARNISH RH
Tech Tips
Use the same procedure as for the LH side.
CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL LOWER CENTER PILLAR GARNISH RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL REAR DOOR INSIDE SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL REAR DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL FRONT PILLAR GARNISH RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL FRONT DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL REAR FLOOR FINISH PLATE
Install in this Direction |
Engage the 2 guides, 6 clips and 4 claws to install the rear floor finish plate as shown in the illustration.
INSTALL FRONT DECK FLOOR BOX
Engage the 2 guides, clip and 3 claws to install the front deck floor box.
INSTALL REAR DECK FLOOR BOX
w/o Woofer:
Engage the 6 claws to install the rear deck floor box.
w/ Woofer:
Engage the clip and 6 claws to install the rear deck floor box.
CONNECT REAR NO. 2 SEAT ASSEMBLY
Install the 6 clips to connect the rear No. 2 seat assembly.
INSTALL NO. 1 DECK BOARD
Engage the 5 clips to install the No. 1 deck board.
INSTALL DECK SIDE TRIM BOX LH
Engage the 4 guides, 2 clips and 2 claws to install the deck side trim box LH.
INSTALL REAR NO. 4 FLOOR BOARD
Install the rear No. 4 floor board.
INSTALL DECK BOARD ASSEMBLY
Install the deck board assembly.
INSTALL TONNEAU COVER ASSEMBLY
Install the tonneau cover assembly.