AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM PROBLEM SYMPTOMS TABLE

Note

If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.

Click here

Tech Tips

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

Automatic Headlight Beam Level Control System
Symptom Suspected Area Link
Automatic headlight beam level control system does not operate (Left Headlight) (for Single Beam Headlight) Headlight beam level control actuator circuit

Click here

Headlight ECU sub-assembly LH

Click here

Automatic headlight beam level control system does not operate (Left Headlight) (for Triple Beam Headlight) Headlight unit LH

Click here

Headlight leveling motor LH

Click here

Headlight ECU sub-assembly LH

Click here

Automatic headlight beam level control system does not operate (Right Headlight) (for Single Beam Headlight) Headlight beam level control actuator circuit

Click here

Headlight ECU sub-assembly RH

Click here

Automatic headlight beam level control system does not operate (Right Headlight) (for Triple Beam Headlight) Headlight unit LH

Click here

Headlight leveling motor RH

Click here

Headlight ECU sub-assembly RH

Click here

Initialization cannot be performed CAN communication system

Click here

Headlight ECU sub-assembly LH

Click here