DOOR CONTROL RECEIVER INSTALLATION

PROCEDURE

1. INSTALL SMART DOOR CONTROL RECEIVER ASSEMBLY (w/o Tire Pressure Warning System)

   Note

   
   

   • Do not drop the smart door control receiver assembly, strike it with tools or subject it to impact.

   • If the smart door control receiver assembly is subjected to an impact, replace it with a new one.

   
   
   1. 

      *A	for Type A
      *B	for Type B

      Connect the connector.

   2. Engage the 2 guides and install the smart door control receiver assembly with the bolt.

      Torque:

      for Type A

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

      for Type B

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      There are four types of bolts and the tightening torque depends on the type of bolt used as shown in the illustration. Therefore, confirm the tightening torque before installing the bolt.

2. INSTALL ELECTRICAL KEY AND TIRE PRESSURE WARNING ECU AND RECEIVER (w/ Tire Pressure Warning System)

   Note

   
   

   • Do not drop the electrical key and tire pressure warning ECU and receiver, strike it with tools or subject it to impact.

   • If the electrical key and tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.

   
   
   1. 

      *A	for Type A
      *B	for Type B

      Connect the connector.

   2. Engage the 2 guides and install the electrical key and tire pressure warning ECU and receiver with the bolt.

      Torque:

      for Type A

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

      for Type B

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      There are four types of bolts and the tightening torque depends on the type of bolt used as shown in the illustration. Therefore, confirm the tightening torque before installing the bolt.

3. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH (w/o Rear No. 2 Seat)

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (w/o Rear No. 2 Seat)

   Click here

5. INSTALL RECLINING REMOTE CONTROL BEZEL RH (w/o Rear No. 2 Seat)

   w/o Rear Power Seat System:

   Click here

6. INSTALL FOLD SEAT SWITCH ASSEMBLY (w/o Rear No. 2 Seat)

   w/ Rear Power Seat System:

   Click here

7. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (w/o Rear No. 2 Seat)

   Click here

8. INSTALL ROPE HOOK ASSEMBLY (w/o Rear No. 2 Seat)

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

9. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear No. 2 Seat)

   Click here

10. INSTALL REAR FLOOR FINISH SIDE PLATE RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

11. INSTALL REAR SEAT SIDE GARNISH RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

12. INSTALL UPPER QUARTER TRIM PAD RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

13. INSTALL REAR SEAT ASSEMBLY RH (w/o Rear No. 2 Seat)

    Click here

14. INSTALL REAR DOOR SCUFF PLATE RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

15. INSTALL REAR FLOOR FINISH PLATE (w/o Rear No. 2 Seat)

    Click here

16. INSTALL DECK SIDE TRIM BOX RH (w/o Rear No. 2 Seat)

    except Full Size Spare Tire:

    Click here

17. INSTALL DECK SIDE TRIM BOX RH (w/o Rear No. 2 Seat)

    for Full Size Spare Tire:

    Click here

18. INSTALL DECK FLOOR BOX RH (w/o Rear No. 2 Seat)

    w/o Spare Tire:

    Click here

19. INSTALL REAR NO. 4 FLOOR BOARD (w/o Rear No. 2 Seat)

    except Full Size Spare Tire:

    Click here

20. INSTALL REAR NO. 4 FLOOR BOARD (w/o Rear No. 2 Seat)

    for Full Size Spare Tire:

    Click here

21. INSTALL REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)

    w/ Spare Tire:

    Click here

22. INSTALL SPARE WHEEL COVER (w/o Rear No. 2 Seat)

    for Compact Spare Tire:

    Click here

23. INSTALL REAR FLOOR CARPET (w/o Rear No. 2 Seat)

    w/o Spare Tire:

    Click here

24. INSTALL REAR NO. 3 FLOOR BOARD (w/o Rear No. 2 Seat)

    Click here

25. INSTALL DECK BOARD ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

26. INSTALL TONNEAU COVER ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

27. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

28. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

29. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (w/ Rear No. 2 Seat)

    Click here

30. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

31. INSTALL ROPE HOOK ASSEMBLY (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

32. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/ Rear No. 2 Seat)

    Click here

33. INSTALL REAR SEAT SIDE GARNISH RH (w/ Rear No. 2 Seat)

    Click here

34. INSTALL FRONT DECK SIDE TRIM COVER RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

35. INSTALL REAR SEAT OUTER TRACK BRACKET COVER RH (w/ Rear No. 2 Seat)

    Click here

36. INSTALL REAR DOOR INSIDE SCUFF PLATE RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

37. INSTALL REAR DOOR SCUFF PLATE RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

38. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

39. REGISTER TRANSMITTER ID (w/ Tire Pressure Warning System)

    Click here

40. INSPECT TIRE PRESSURE WARNING SYSTEM (w/ Tire Pressure Warning System)

    Click here

41. PERFORM INITIALIZATION (w/ Tire Pressure Warning System)

    Click here