REAR ACCELERATION SENSOR INSTALLATION

PROCEDURE

1. INSTALL ACCELERATION SENSOR ASSEMBLY

   
   

   1. Install the acceleration sensor assembly with the bolt.

      Torque:

      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

      Note

      
      

      • Avoid any impact to the acceleration sensor assembly.

      • Do not drop the acceleration sensor assembly. If it is dropped, replace it with a new one.

   2. Connect the connector.

   3. Return the luggage compartment trim cover RH to its original position.

2. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

   Click here

3. INSTALL FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER

   Click here

4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

5. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

6. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

7. INSTALL LUGGAGE COMPARTMENT TRIM BOX

   Click here

8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM COVER

   Click here

9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable from the negative (-) auxiliary battery terminal, some systems need to be initialized after the cable is reconnected.

   Click here

10. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here