AIR FUEL RATIO SENSOR INSTALLATION

PROCEDURE


  1. INSTALL AIR FUEL RATIO SENSOR


    1. A004UAQE03
      *1 Fulcrum Length

      Using SST, install the air fuel ratio sensor.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips


      • Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

      • Make sure SST and the wrench are connected in a straight line.

    2. Connect the air fuel ratio sensor connector and clamp.

    3. A004RKP

      Install the harness clamp.

  2. INSPECT FOR EXHAUST GAS LEAK

    Click here

  3. PERFORM INITIALIZATION


    1. Perform A/F sensor compensation code reset.