FRONT AIRBAG SENSOR REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  3. REMOVE RADIATOR GRILLE


    1. A01DYIBE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille.

    2. Remove the 2 clips and 2 screws.

    3. A01DY0N

      Detach the 6 claws and remove the radiator grille.

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY


    1. Remove the bolt and battery clamp sub-assembly.

  5. REMOVE BATTERY


    1. Disconnect the cable from the positive (+) battery terminal.

    2. Remove the battery.

  6. REMOVE FRONT AIRBAG SENSOR LH

    A01DV5P

    1. Remove the nut and front airbag sensor LH.

    2. Disconnect the connector.