CRANKSHAFT POSITION SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE


  1. REMOVE ENGINE AND TRANSMISSION ASSEMBLY (for AWD)

    Click here

  2. DISCONNECT FRONT FRAME ASSEMBLY (for AWD)

    Click here

  3. REMOVE FRONT ENGINE MOUNTING INSULATOR (for AWD)

    Click here

  4. REMOVE NO. 2 MANIFOLD STAY (for AWD)


    1. B006B8H

      Remove the 2 bolts, nut and No. 2 manifold stay.

  5. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH (for AWD)

    Click here

  6. REMOVE TRANSMISSION UNDER COVER (for 2WD)

    Click here

  7. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (for 2WD)

    Click here

  8. REMOVE CRANKSHAFT POSITION SENSOR


    1. B006AR6

      Disconnect the crankshaft position sensor connector.

    2. Remove the bolt and crankshaft position sensor.

      Note

      If the crankshaft position sensor has been struck or dropped, replace it.