TELEPHONE ANTENNA INSTALLATION

PROCEDURE


  1. INSTALL ROOF ANTENNA ASSEMBLY


    1. B006BZV

      When reusing the roof antenna assembly:


      1. Attach a new seal.

    2. B006FXKC03
      B006DHE Install in this Direction(1)
      B006B42 Install in this Direction(2)

      Attach the claw and guide in the order shown in the illustration and install the roof antenna assembly.

    3. Install the roof antenna assembly.

    4. Install a new washer & holder.

    5. B006GTB

      Install the bolt.

      Torque:
      9.5 N*m  { 97 kgf*cm, 84 in.*lbf }
    6. B006GDH

      Connect the connector.

  2. INSTALL ROOF HEADLINING ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  5. INSPECT SRS WARNING LIGHT

    Click here

  6. INSPECT FRONT SEAT ASSEMBLY

    Click here

  7. INSPECT REAR SEAT ASSEMBLY (for Power Seat)

    Click here

  8. INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

    Click here

  9. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

    Click here

  10. INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)

    Click here

  11. INSPECT SEAT BELT WARNING SYSTEM

    Click here