REAR SEAT RECLINING ADJUSTER INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

B006C5U

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL NO. 1 SEAT RECLINING ADJUSTER ASSEMBLY RH


    1. B005WGEN02

      Temporarily install No. 1 seat reclining adjuster assembly RH with the 4 nuts.

    2. Tighten the 4 nuts in the order shown in the illustration and install the No. 1 seat reclining adjuster assembly RH.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    3. Connect the connector.

  2. INSTALL REAR SEAT ASSEMBLY

    Click here

  3. INITIALIZATION OF SEAT ECU

    Click here

  4. INSPECT SRS WARNING LIGHT

    Click here

  5. INSPECT REAR SEAT ASSEMBLY

    Click here

  6. INSPECT SEAT HEATER SYSTEM

    Click here

  7. INSPECT CLIMATE CONTROL SEAT SYSTEM

    Click here

  8. INSPECT SEAT BELT WARNING SYSTEM

    Click here

  9. INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)

    Click here