| DTC Code | DTC Name |
|---|---|
| B2456 | Left Headlight ECU Variation Error |
DESCRIPTION
This DTC is output when a headlight ECU sub-assembly LH that is incompatible with the vehicle is installed.
The headlight ECU sub-assembly LH outputs DTC B2456.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B2456 | Left Headlight ECU Variation Error | Headlight ECU sub-assembly LH variation mismatch |
|
- |
CAUTION / NOTICE / HINT
Note
After the headlight ECU sub-assembly LH is replaced, vehicle information registration and initialization are necessary.
Before replacing the ECM or main body ECU (multiplex network body ECU), refer to Service Bulletin.*1
*1: w/ Entry and Start System
PROCEDURE
CLEAR DTC
Clear the DTCs.
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK FOR DTC
Turn the ignition switch to ON.
Turn on the headlights using the light control switch.
Check for DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
USE SIMULATION METHOD TO CHECK Click here |
| B |
|
CHECK ECM
Check that the ECM part number matches the vehicle.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| B |
|
REPLACE ECM Click here |
| C |
|
REPLACE ECM Click here |
| A |
|
CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
Check that the main body ECU (multiplex network body ECU) part number matches the vehicle.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| A |
|
REPLACE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH Click here |
| B |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here |
| C |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here |