TURBOCHARGER REMOVAL

PROCEDURE


  1. DRAIN ENGINE OIL

    Click here

  2. DRAIN COOLANT (for Intercooler)

    Click here

  3. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

    Click here

  4. DISCONNECT NO. 1 TURBO WATER PIPE SUB-ASSEMBLY


    1. B008H4N

      Slide the 2 clips and disconnect the No. 1 turbo water hose and No. 2 turbo water hose from the No. 1 turbo water pipe sub-assembly.

  5. DISCONNECT TURBO OIL INLET PIPE SUB-ASSEMBLY


    1. B008JF3

      Remove the 2 bolts, union bolt and disconnect the turbo oil inlet pipe sub-assembly.

    2. Remove the union bolt side gasket.

  6. REMOVE TURBOCHARGER SUB-ASSEMBLY


    1. B008JJ5

      Disconnect the vacuum transmitting hose assembly from the waste gate valve actuator with bracket assembly.

    2. B008HEI

      Disconnect the air by-pass valve assembly connector and wire harness clamp from the turbocharger sub-assembly.

    3. B008JDW

      Remove the 4 nuts and turbocharger sub-assembly.

    4. B008IJN

      Remove the gasket from the cylinder head sub-assembly.

    5. B008IV5

      Remove the gasket from the turbo oil inlet pipe sub-assembly.

  7. REMOVE COMPRESSOR INLET ELBOW


    1. B008I1N

      Remove the 2 nuts and compressor inlet elbow.

    2. Remove the gasket.

  8. REMOVE NO. 1 TURBO WATER PIPE SUB-ASSEMBLY


    1. B008IJT

      Remove the bolt, 2 nuts and No. 1 turbo water pipe sub-assembly.

    2. B008JOR

      Remove the gasket.

  9. REMOVE TURBO OIL INLET PIPE SUB-ASSEMBLY


    1. B008HJL

      Remove the 2 nuts and turbo oil inlet pipe sub-assembly.

    2. B008H0C

      Remove the gasket.