PARKING BRAKE LEVER REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  4. REMOVE PARKING BRAKE LEVER COVER

  5. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY


    1. A01DZXVE01
      Text in Illustration
      *1 Lock Nut
      *2 No. 1 Parking Brake Cable Adjusting Nut

      Remove the lock nut and No. 1 parking brake cable adjusting nut.

    2. A01DUXU

      Remove the 2 bolts and lever (with the No. 1 parking brake cable).

    3. A01DXNLE01
      Text in Illustration
      *1 Claw

      Bend the claw so that the No. 1 parking brake cable can be removed.

    4. A01E2DM

      Remove the 2 bolts and 2 nuts.

    5. Disconnect the cable from the lever.

    6. A01DWTC

      Disconnect the parking brake switch connector.

    7. Remove the screw and switch from the lever.