AIR FUEL RATIO SENSOR INSTALLATION

Tech Tips

Perform "Inspection After Repairs" after replacing the Air fuel ratio sensor Click here.


  1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

    Tech Tips

    Perform "Inspection After Repairs" after replacing the Air fuel ratio sensor Click here.


    1. B007VZTE01
      Text in Illustration
      *a Fulcrum Length

      Using SST, install the air fuel ratio sensor to the front exhaust pipe assembly.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips


      • Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). If using a torque wrench with a length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

      • Make sure SST and the wrench are connected in a straight line.

    2. Connect the air fuel ratio sensor connector.