REAR CROSSING TRAFFIC ALERT BUZZER INSTALLATION

PROCEDURE


  1. INSTALL BLIND SPOT MONITOR BUZZER


    1. B006ELY

      Connect the connector.

    2. Attach the clamp to install the blind spot monitor buzzer.

  2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. for Power Seat:

      Click here

    2. for Fixed Seat Type:

      Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    for 8GR-FKS:

    Click here

    for V35A-FTS:

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  5. INSPECT SRS WARNING LIGHT

    Click here

  6. INSPECT SEAT BELT WARNING SYSTEM

    Click here

  7. INSPECT REAR SEAT ASSEMBLY (for Power Seat)

    Click here

  8. INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

    Click here

  9. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

    Click here

  10. INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)

    Click here

  11. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here