KNOCK SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Note

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

Tech Tips

Perform "Inspection After Repair" after replacing the knock control sensor.


PROCEDURE


  1. INSTALL KNOCK CONTROL SENSOR

    Tech Tips

    Perform "Inspection After Repair" after replacing the knock control sensor.



    1. B006DXTC01
      *A for Bank 1
      *B for Bank 2
      *a View A
      *b View B
      *c Top
      *d Engine Front
      *e Engine Rear
      B006AHR Front
      B006EC9 View A
      B006FCW View B

      Install the 2 knock control sensors with the 2 bolts so that the knock control sensor installation position is as shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note


      • Make sure that each knock control sensor is in the correct position.

      • If a knock control sensor has been struck or dropped, replace it.

      • Make sure that the knock control sensor is in the correct position.

    2. Connect the 2 knock control sensor connectors.

  2. INSTALL DIRECT FUEL INJECTOR ASSEMBLY

    Click here