BACK DOOR COURTESY SWITCH INSTALLATION

PROCEDURE


  1. INSTALL BACK DOOR LOCK ASSEMBLY

    Tech Tips

    Make sure to remove the string before installing a new back door lock assembly.


    1. Apply MP grease to the sliding parts of the back door lock assembly.

    2. Install the back door lock assembly with the 3 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }
    3. Connect the connector.

  2. INSTALL BACK DOOR LOCK COVER

    Click here

  3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  4. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  5. INSTALL BACK DOOR SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  6. INSTALL BACK DOOR TRIM UPPER PANEL ASSEMBLY

    Click here

  7. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  8. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click here