Info Added 2017-10-06
PROCEDURE
INSTALL NO. 1 BACK DOOR EMBLEM
INSTALL NO. 4 BACK DOOR NAME PLATE (for AWD)
INSTALL NO. 2 BACK DOOR NAME PLATE
INSTALL NO. 1 BACK DOOR NAME PLATE (w/ Brand Mark)
INSTALL REAR LIGHT ASSEMBLY LH
INSTALL REAR LIGHT ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL NO. 2 BACK DOOR PANEL PROTECTOR
Clean vehicle installation surface.
Remove the release paper from a new No. 2 back door panel protector.
Double-sided Tape |
Engage the clips to install the No. 2 back door panel protector.
Press the double-sided tape area of the No. 2 back door panel protector.
INSTALL NO. 1 BACK DOOR PANEL PROTECTOR
Tech Tips
Use the same procedure for the No. 2 back door panel protector.
INSTALL BACK DOOR PANEL CUSHION
Engage the claws to install the 2 back door panel cushions.
INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)
INSTALL NO. 2 BACK DOOR GARNISH RETAINER (w/o Rear View Monitor System)
Engage the claws to install the No. 2 back door garnish retainer.
INSTALL LICENSE PLATE LIGHT ASSEMBLY
INSTALL BACK DOOR OPENER SWITCH ASSEMBLY
INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
INSTALL REAR WASHER NOZZLE (w/ Rear Wiper)
INSTALL REAR SPOILER ASSEMBLY
INSTALL BACK DOOR LOWER STOPPER
Engage the guide and install the back door lower stopper.
Install a new bolt.
Tech Tips
Use the same procedure for the RH side and LH side.
INSTALL REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)
INSTALL REAR WIPER MOTOR GROMMET (w/ Rear Wiper)
INSTALL REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)
INSTALL BACK DOOR LOCK ASSEMBLY
INSTALL BACK DOOR LOCK COVER
Clean vehicle installation surface.
Remove the release paper from a new back door lock cover.
Double-sided Tape |
Engage the claws to install the back door lock cover.
Press the double-sided tape area of the back door lock cover.
INSTALL BACK DOOR SERVICE HOLE COVER LH
Engage the claws to install the back door service hole cover LH.
INSTALL BACK DOOR SERVICE HOLE COVER RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL NO. 3 BACK DOOR SERVICE HOLE COVER
Engage the claws to install the No. 3 back door service hole cover.
INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER
Tech Tips
Use the same procedure as for the No. 1 back door service hole cover.
INSTALL NO. 1 BACK DOOR SERVICE HOLE COVER
Engage the claws to install the No. 1 back door service hole cover.
INSTALL DOOR PULL HANDLE
Engage the claws to install the door pull handle as shown in the illustration.
Tech Tips
Full open the back door, and ensure that the arrow provided on the back of the door pull handle is facing upward.
INSTALL BACK DOOR TRIM PANEL ASSEMBLY
Engage the clips to install the back door trim panel assembly.
INSTALL PACKAGE TRAY TRIM GARNISH HOOK
Tech Tips
Use the same procedure for the RH side and LH side.
Install the package tray trim garnish hook.
Install the screw.
INSTALL BACK DOOR SIDE GARNISH LH
Engage the claws and clips to install the back door side garnish LH.
INSTALL BACK DOOR SIDE GARNISH RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL BACK DOOR TRIM UPPER PANEL ASSEMBLY
Engage the claws and clips to install the back door trim upper panel assembly.
INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)