STARTER(w/o Stop And Start System) INSTALLATION

CAUTION / NOTICE / HINT

Note

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE


  1. INSTALL STARTER ASSEMBLY


    1. B006DS3C01
      B006AHR Connector
      B006EC9 Bolt

      Install the starter assembly with the 2 bolts.

      Torque:
      46 N*m  { 469 kgf*cm, 34 ft.*lbf }

    2. Connect the connector and attach the clamp.

    3. B006EGJ

      Install the No. 2 engine wire with the nut to the terminal B.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }
    4. B006B2G

      Attach the claw to close the terminal cover.

    5. for 2WD:


      1. B0069N0

        Install the bolt to connect the oil cooler tube.

        Torque:
        22 N*m  { 224 kgf*cm, 16 ft.*lbf }

  2. INSTALL STARTER COVER


    1. B006DAHC01
      B006AHR Bolt
      B006EC9 Nut

      Install the starter cover with the bolt and nut.

      Torque:
      11.5 N*m  { 117 kgf*cm, 8 ft.*lbf }

  3. INSTALL FLYWHEEL HOUSING SIDE STAY


    1. Install the flywheel housing side stay with the 2 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  4. CONNECT NO. 2 ENGINE WIRE


    1. Install the 2 bolts and connect the No. 2 engine wire.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  5. INSTALL FRONT NO. 1 ENGINE MOUNTING BRACKET RH (for AWD)

    Click here

  6. INSTALL FRONT ENGINE MOUNTING INSULATOR (for AWD)

    Click here

  7. CONNECT FRONT FRAME ASSEMBLY (for AWD)

    Click here

  8. INSTALL CONVERTER ASSEMBLY RH

    Click here

  9. INSTALL ENGINE ASSEMBLY WITH TRANSMISSION

    Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here