DOOR CONTROL RELAY INSTALLATION

PROCEDURE

1. INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (for LHD)

   
   

   1. Install the double lock door control relay assembly with the 2 claws.

2. INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (for RHD)

   
   

   1. Install the double lock door control relay assembly with the 2 claws.

3. INSTALL ECU INTEGRATION BOX RH (for LHD)

   Click here

4. INSTALL ECU INTEGRATION BOX RH (for RHD)

   
   

   1. Install the ECU integration box RH with the 2 nuts and bolt.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Connect the connectors.

   3. Attach the 2 clamps.

5. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for RHD)

   Click here

6. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Click here

7. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (for RHD)

   Click here

8. INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

   Click here

9. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for RHD)

   Click here

10. INSTALL UPPER REAR CONSOLE PANEL (for RHD)

    Click here

11. INSTALL CONSOLE ARMREST ASSEMBLY (for RHD)

    Click here

12. INSTALL COWL SIDE TRIM BOARD RH (for RHD)

    Click here

13. INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here

14. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

    Click here

15. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here