ROOF HEADLINING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL REAR NO. 2 SIDE RAIL SPACER LH


    1. Attach the 2 claws to install the rear No. 2 side rail spacer LH.

    2. Install the 2 bolts.

  2. INSTALL REAR NO. 2 SIDE RAIL SPACER RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR SIDE RAIL SPACER LH


    1. Attach the claw to install the rear side rail spacer LH.

    2. Install the 2 bolts.

  4. INSTALL REAR SIDE RAIL SPACER RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH

    Click here

  6. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH


    1. B008ION

      Attach the 6 guides to install the front shoulder belt anchor plate sub-assembly LH.

  8. INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL ROOF HEADLINING ASSEMBLY (for Normal Roof)


    1. for Type A:


      1. B008IAV

        Insert the roof headlining assembly into the cabin from the back door.

        Note


        • Check that the corners of the roof headlining are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

        • Make sure that the roof headlining does not get caught on anything as it may become bent or damaged.

        • Do not damage the roof headlining or vehicle interior.

      2. Attach the 3 clips to install the roof headlining assembly.

        B008H7J
    2. for Type B:


      1. B008HTS

        Insert the roof headlining assembly into the cabin from the back door.

        Note


        • Check that the corners of the roof headlining are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

        • Make sure that the roof headlining does not get caught on anything as it may become bent or damaged.

        • Do not damage the roof headlining or vehicle interior.

      2. Attach the 3 clips to install the roof headlining assembly.

        B008H1X
    3. B008IWM

      Connect the connector to the rear pillar RH.

    4. for LHD:


      1. B008H8JC04
        *A w/ Rain Senseor

        w/ EC Mirror, w/o Lane Departure Alert System:

        Connect the connectors.

      2. B008H2HC04
        *A w/ Rain Senseor

        w/ EC Mirror, w/ Lane Departure Alert System:

        Connect the connectors.

    5. for RHD:


      1. B008IHVC04
        *A w/ Rain Senseor

        w/ EC Mirror, w/o Lane Departure Alert System:

        Connect the connectors.

      2. B008JEEC04
        *A w/ Rain Senseor

        w/ EC Mirror, w/ Lane Departure Alert System:

        Connect the connectors.

    6. B008H01

      Connect the connectors and attach the clamps to the front pillar LH.

    7. B008IRD

      Connect the connectors and attach the clamps to the front pillar RH.

  10. INSTALL ROOF HEADLINING ASSEMBLY (for Sliding Roof)


    1. for Type A:


      1. B008IWU

        Insert the roof headlining assembly into the cabin from the back door.

        Note


        • Check that the corners of the roof headlining are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

        • Make sure that the roof headlining does not get caught on anything as it may become bent or damaged.

        • Do not damage the roof headlining or vehicle interior.

      2. Attach the guide, 3 clips and 8 fasteners to install the roof headlining assembly.

        B008IMPC04
        *a Guide *b Fastener
    2. for Type B:


      1. B008H4Y

        Insert the roof headlining assembly into the cabin from the back door.

        Note


        • Check that the corners of the roof headlining are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

        • Make sure that the roof headlining does not get caught on anything as it may become bent or damaged.

        • Do not damage the roof headlining or vehicle interior.

      2. Attach the guide, 3 clips and 8 fasteners to install the roof headlining assembly.

        B008IRTC04
        *a Guide *b Fastener
    3. B008IWM

      Connect the connector to the rear pillar RH.

    4. for LHD:


      1. B008H8JC05
        *A w/ Rain Sensor

        w/ EC Mirror, w/o Lane Departure Alert System:

        Connect the connectors.

      2. B008H2HC05
        *A w/ Rain Sensor

        w/ EC Mirror, w/ Lane Departure Alert System:

        Connect the connectors.

    5. for RHD:


      1. B008IHVC05
        *A w/ Rain Sensor

        w/ EC Mirror, w/o Lane Departure Alert System:

        Connect the connectors.

      2. B008JEEC05
        *A w/ Rain Sensor

        w/ EC Mirror, w/ Lane Departure Alert System:

        Connect the connectors.

    6. B008JC7

      Connect the drive gear connector.

    7. B008H01

      Connect the connectors and attach the clamps to the front pillar LH.

    8. B008IRD

      Connect the connectors and attach the clamps to the front pillar RH.

  11. INSTALL ROOF HEADLINING ASSEMBLY (for Glass Roof)


    1. B008ID8

      Insert the roof headlining assembly into the cabin from the back door.

      Note


      • Check that the corners of the roof headlining are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

      • Make sure that the roof headlining does not get caught on anything as it may become bent or damaged.

      • Do not damage the roof headlining or vehicle interior.

    2. Attach the guide, 3 clips and 14 fasteners to install the roof headlining assembly.

      B008HWGC04
      *a Guide *b Fastener
    3. B008IWM

      Connect the connector to the rear pillar RH.

    4. for LHD:


      1. B008H8JC06
        *A w/ Rain Sensor

        w/ EC Mirror, w/o Lane Departure Alert System:

        Connect the connectors.

      2. B008H2HC06
        *A w/ Rain Sensor

        w/ EC Mirror, w/ Lane Departure Alert System:

        Connect the connectors.

    5. for RHD:


      1. B008IHVC06
        *A w/ Rain Sensor

        w/ EC Mirror, w/o Lane Departure Alert System:

        Connect the connectors.

      2. B008JEEC06
        *A w/ Rain Sensor

        w/ EC Mirror, w/ Lane Departure Alert System:

        Connect the connectors.

    6. B008H01

      Connect the connectors and attach the clamps to the front pillar LH.

    7. B008IRD

      Connect the connectors and attach the clamps to the front pillar RH.

  12. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror, w/o Lane Departure Alert System)

    Click here

  13. INSTALL RAIN SENSOR COVER (w/ Rain Sensor)

    Click here

  14. INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ EC Mirror, w/ Lane Departure Alert System)

    Click here

  15. INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ EC Mirror, w/ Lane Departure Alert System)

    Click here

  16. INSTALL SEAT BELT ANCHOR COVER


    1. Attach the 2 guides, 2 claws and 3 clips to install the seat belt anchor cover.

  17. INSTALL SPOT LIGHT ASSEMBLY

    Click here

  18. INSTALL MAP LIGHT ASSEMBLY

    Click here

  19. INSTALL ASSIST GRIP SUB-ASSEMBLY

    Tech Tips

    Use the same procedure for both assist grip sub-assemblies.


    1. B008J5E

      Install the 2 clips and 2 assist grip covers to the assist grip.

    2. B008I6D

      Attach the 2 clips to install the assist grip sub-assembly.

  20. INSTALL REAR ASSIST GRIP ASSEMBLY LH


    1. B008GSX

      Install the 2 clips and 2 assist grip covers to the rear assist grip.

    2. B008JEC

      Attach the 2 clips to install the rear assist grip assembly LH.

  21. INSTALL REAR ASSIST GRIP ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  22. INSTALL VISOR HOLDER

    Tech Tips

    Use the same procedure for both visor holders.


    1. B008HFQ

      Attach the 2 claws.

    2. Push in the visor holder to install it.

  23. INSTALL VISOR ASSEMBLY LH


    1. B008I8QC01
      *1 Visor Holder

      Install the visor assembly LH with the 2 screws.

    2. Connect the visor assembly LH to the visor holder.

  24. INSTALL VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  25. INSTALL VISOR BRACKET COVER

    Tech Tips

    Use the same procedure for both visor bracket covers.


    1. B008H3X

      Attach the 4 claws to install the visor bracket cover.

  26. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH


    1. Attach the 7 clips to install the inner roof side garnish assembly LH.

  27. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  28. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Connect the connectors.

    2. Attach the 2 guides, 2 clips and 5 claws to install the deck trim side panel assembly LH.

  29. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  30. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. for LH Side:


      1. Turn the claw upward as shown in the illustration and insert the No. 1 luggage compartment trim hook.

      2. Turn the No. 1 luggage compartment trim hook in the direction indicated by the arrow shown in the illustration and attach the claw and guide to install the No. 1 luggage compartment trim hook.

        B008JM0
    2. for RH Side:


      1. Turn the claw upward as shown in the illustration and insert the No. 1 luggage compartment trim hook.

      2. Turn the No. 1 luggage compartment trim hook in the direction indicated by the arrow shown in the illustration and attach the claw and guide to install the No. 1 luggage compartment trim hook.

        B008H4C
  31. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Tech Tips

    Use the same procedure for all luggage hold belt striker assemblies.


    1. Install the luggage hold belt striker assembly with the bolt.

  32. INSTALL ROPE HOOK ASSEMBLY

    Tech Tips

    Use the same procedure for both rope hook assemblies.


    1. B008HU6

      Install the rope hook assembly with the bolt.

    2. B008GRV

      Attach the 2 claws to close the cover.

  33. INSTALL UPPER DECK TRIM SIDE BOARD LH


    1. Attach the guide and 10 claws to install the upper deck trim side board LH.

    2. Install the bolt.

  34. INSTALL UPPER DECK TRIM SIDE BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  35. INSTALL NO. 3 BATTERY SERVICE COVER BOARD (for Power Seat)

    Click here

  36. INSTALL NO. 2 BATTERY SERVICE COVER BOARD (for Power Seat)

    Click here

  37. INSTALL CENTER PILLAR GARNISH ASSEMBLY LH


    1. Pass the front seat outer belt floor anchor through the center pillar garnish assembly LH.

    2. Attach the clip to install the center pillar garnish assembly LH.

    3. Install the 2 clips.

  38. INSTALL CENTER PILLAR GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  39. INSTALL LOWER CENTER PILLAR GARNISH LH


    1. Attach the 4 clips.

    2. While pulling both sides of the lower center garnish LH outward by hand, set the lower center pillar garnish LH in place, and then attach the 2 claws to install the lower center pillar garnish LH.

  40. INSTALL LOWER CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  41. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH


    1. Connect the front seat outer belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
  42. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  43. INSTALL OUTER LAP BELT ANCHOR COVER

    Tech Tips

    Use the same procedure for both outer lap belt anchor covers.


    1. Attach the guide and 2 claws to install the outer lap belt anchor cover.

  44. INSTALL FRONT PILLAR GARNISH ASSEMBLY LH


    1. Install the front pillar garnish clips to the front pillar garnish LH.

      Tech Tips

      Install the front pillar garnish clips so that it faces as shown in the illustration.

      B008IMIC01
      *a CORRECT *b INCORRECT
    2. B008IIV

      Attach the 2 guides.

    3. B008JM7C01
      *1 Front Pillar Garnish Clip

      Attach the 2 front pillar garnish clips to install the front pillar garnish assembly LH.

      Tech Tips

      Make sure that the curtain shield airbag assembly LH is not pinched.

  45. INSTALL FRONT PILLAR GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  46. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. B008HUCC03
      *a Paint Mark
      *b Mark Position

      Align the paint mark on the rear door opening trim weatherstrip LH with the mark position on the vehicle and install the rear door opening trim weatherstrip LH as shown in the illustration.

  47. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  48. INSTALL REAR DOOR SCUFF PLATE LH


    1. B008JLZ

      Attach the 2 guides and 8 claws to install the rear door scuff plate LH.

  49. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  50. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. B008HXBC03
      *a Paint Mark
      *b Mark Position

      Align the paint mark on the front door opening trim weatherstrip LH with the mark position on the vehicle and install the front door opening trim weatherstrip LH as shown in the illustration.

  51. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  52. INSTALL COWL SIDE TRIM BOARD LH


    1. Attach the clip to install the cowl side trim board LH.

    2. Install the cap nut.

  53. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  54. INSTALL DOOR SCUFF PLATE ASSEMBLY LH


    1. B008JGI

      Attach the 2 guides and 10 claws to install the door scuff plate assembly LH.

  55. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  56. INSTALL REAR FLOOR FINISH PLATE


    1. Attach the 4 claws and 4 clips to install the rear floor finish plate.

      B008GM5C06
      *A w/ Spare Tire *B w/o Spare Tire
  57. INSTALL NO. 2 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)


    1. Attach the 4 guides and 2 clips to install the No. 2 tool box sub-assembly.

    2. Install the screw.

  58. INSTALL NO. 2 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)


    1. Attach the 4 guides and clip to install the No. 2 tool box sub-assembly.

    2. Install the screw.

  59. INSTALL NO. 1 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)


    1. Attach the 5 guides, 2 claws and clip to install the No. 1 tool box sub-assembly.

    2. Install the screw.

  60. INSTALL NO. 1 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)


    1. Attach the 4 guides, 4 claws and 2 clips to install the No. 1 tool box sub-assembly.

    2. Install the screw.

  61. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)


    1. Attach the 3 guides to install the deck floor box LH.

    2. Install the 4 clips.

  62. INSTALL DECK FLOOR BOX LH (w/o Spare Tire)


    1. Attach the 4 guides to install the deck floor box LH.

    2. Install the 2 clips.

  63. INSTALL DECK FLOOR BOX RH (w/ Spare Tire)


    1. Attach the 4 guides to install the deck floor box RH.

    2. Install the 2 clips.

  64. INSTALL DECK FLOOR BOX RH (w/o Spare Tire)


    1. Attach the 4 guides to install the deck floor box RH.

    2. Install the 2 clips.

  65. INSTALL SPARE TIRE (w/ Spare Tire)


    1. Install the spare tire.

  66. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)


    1. B008HHE

      for Compact Size Spare Tire:

      Install the rear deck floor box.

    2. B008I23

      for Full Size Spare Tire:

      Install the rear deck floor box.

  67. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY


    1. B008ISSN01

      w/o Spare Tire, for Compact Size Spare Tire:

      Install the No. 3 deck board sub-assembly.

      Tech Tips

      Make sure part A shown in illustration faces the vehicle front.

    2. B008H4B

      for Full Size Spare Tire:

      Install the No. 3 deck board sub-assembly.

  68. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY


    1. B008JL9N01

      w/o Spare Tire, for Compact Size Spare Tire:

      Install the No. 2 deck board sub-assembly.

      Tech Tips

      Make sure part A shown in illustration faces the vehicle front.

    2. B008J3H

      for Full Size Spare Tire:

      Install the No. 2 deck board sub-assembly.

  69. INSTALL DECK BOARD ASSEMBLY


    1. B008JLD

      w/o Spare Tire, for Compact Size Spare Tire:

      Install the deck board assembly.

    2. B008HK2

      for Full Size Spare Tire:

      Install the deck board assembly.

  70. INSTALL TONNEAU COVER ASSEMBLY


    1. Install the tonneau cover assembly.

  71. INSTALL REAR SEAT ASSEMBLY (for Manual Seat)

    Click here

  72. INSTALL REAR SEAT ASSEMBLY (for Power Seat)

    Click here

  73. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  74. CHECK SRS WARNING LIGHT

    Click here

  75. INSPECT SEAT HEATER SYSTEM (for Rear Seat, w/ Seat Heater System)

    Click here