HEATED OXYGEN SENSOR REMOVAL

PROCEDURE


  1. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE FRONT FLOOR COVER CENTER LH

    Click here

  3. REMOVE HEATED OXYGEN SENSOR


    1. B008IVY

      Disconnect the heated oxygen sensor connector.

    2. B008J5MN01

      Disconnect the grommet from the floor panel.

    3. Detach the wire harness clamp.

    4. Using SST, remove the heated oxygen sensor from the center exhaust pipe assembly.

      SST
      09224-00011

      Note

      Do not damage the heated oxygen sensor.