CLUTCH RELEASE CYLINDER (except 1GR-FE) INSTALLATION


  1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY


    1. Install the clutch release cylinder with the 2 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  2. CONNECT CLUTCH RELEASE CYLINDER FLEXIBLE TUBE


    1. Using a union nut wrench, connect the flexible tube.

      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

  3. BLEED AIR FROM CLUTCH PIPE LINE

    Click here

  4. CHECK FOR CLUTCH FLUID LEAKAGE

  5. CHECK FLUID LEVEL IN RESERVOIR

    Fluid
    Made Fluid
    for TSAM Made SAE J1704 or FMVSS No. 116 DOT 4
    except TSAM Made SAE J1703 or FMVSS No. 116 DOT 3