REAR CENTER SEAT OUTER BELT ASSEMBLY(for Fixed Seat Type) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSPECT REAR CENTER SEAT OUTER BELT ASSEMBLY

    Click here

  2. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. B006B8ZN01

      Attach the guide and temporarily install the rear center seat outer belt assembly.

    2. Install the 2 bolts in the order shown in the illustration.

      Torque:
      Bolt A
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
      Bolt B
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
  3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. Attach the guide in the installation direction shown in the illustration.

      B006FFVC02
      B006DHE Install in this Direction - -
    2. Pass the rear seat outer belt assembly LH, rear seat outer belt assembly RH and rear center seat outer belt assembly through the hole of the package tray trim panel assembly.

    3. Push in the installation direction to attach the clip.

      B006EK1C02
      B006DHE Install in this Direction - -
    4. Install the package tray trim panel assembly with the 2 clips.

    5. B006CXPC01
      B006DHE Install in this Direction

      Attach the guide in the installation direction shown in the illustration.

    6. Attach the claw and install the shoulder guide of the rear center seat outer belt assembly.

  4. INSTALL CENTER NO. 1 SPEAKER GRILLE SUB-ASSEMBLY

    Click here

  5. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click here

  6. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL PACKAGE TRAY TRIM SIDE COVER LH

    Click here

  8. INSTALL PACKAGE TRAY TRIM SIDE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL PACKAGE TRAY TRIM GARNISH LH

    Click here

  10. INSTALL PACKAGE TRAY TRIM GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH

    Click here

  12. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  14. INSTALL REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  15. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  16. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  17. INSTALL REAR SEATBACK HOLDER

    Click here

  18. INSTALL REAR SEATBACK ASSEMBLY

    Click here

  19. INSTALL NO. 1 SEAT ARMREST CAP

    Click here

  20. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY (FLOOR ANCHOR)


    1. B006GNEC02
      *a Protruding Part

      Install the floor anchor of the rear center seat outer belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the floor anchor part of the rear center seat outer belt assembly to overlap the protruding part.

    2. Check that the ELR locks.


      1. With the rear center seat outer belt assembly installed to the vehicle, check that the belt locks when it is pulled out quickly.

  21. INSTALL REAR SEAT OUTER BELT ASSEMBLY LH (FLOOR ANCHOR)

    Click here

  22. INSTALL REAR SEAT OUTER BELT ASSEMBLY RH (FLOOR ANCHOR)

    Tech Tips

    Use the same procedure described for the LH side.

  23. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  24. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  25. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

  26. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  27. INSPECT SRS WARNING LIGHT

    Click here

  28. INSPECT SEAT BELT WARNING SYSTEM

    Click here

  29. INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

    Click here