CAUTION / NOTICE / HINT
Note
When replacing the injectors (including shuffling the injectors between the cylinders), common rail, intake manifold or cylinder head, it is necessary to replace the injection pipes with new ones.
When replacing the fuel supply pump, common rail, intake manifold or cylinder head, it is necessary to replace the fuel inlet pipe with a new one.
PROCEDURE
PRECAUTION
Note
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE NO. 1 ENGINE COVER
DISCONNECT ENGINE WIRE
REMOVE INJECTION PIPE SUB-ASSEMBLY
REMOVE FUEL INLET PIPE SUB-ASSEMBLY
REMOVE COMMON RAIL ASSEMBLY
Disconnect the fuel hose.
Remove the 2 bolts and common rail.