ROOF HEADLINING(for TMMF Made 3 Door) REMOVAL

PROCEDURE


  1. REMOVE DECK BOARD ASSEMBLY

    Click here

  2. REMOVE SPARE WHEEL COVER


    1. A01VLVV

      Remove the spare wheel cover.

  3. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

    Click here

  4. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

    Click here

  5. REMOVE FRONT DOOR SCUFF PLATE RH


    1. A01VFH1

      Disengage the 8 claws and remove the front door scuff plate.

  6. REMOVE FRONT DOOR SCUFF PLATE LH

    Tech Tips

    Use the same procedure as for the RH side.

  7. REMOVE COWL SIDE TRIM BOARD RH

    Click here

  8. REMOVE COWL SIDE TRIM BOARD LH

    Tech Tips

    Use the same procedure as for the RH side.

  9. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    1. A01VF1Y

      Remove the front door opening trim weatherstrip.

  10. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Tech Tips

    Use the same procedure as for the RH side.

  11. REMOVE FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY RH

    Click here

  12. REMOVE FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side.

  13. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH


    1. A01VEH7

      Disengage the 8 clips and 10 claws.

    2. Disengage the 3 guides and remove the quarter trim panel.

  14. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side.

  15. REMOVE CENTER PILLAR UPPER GARNISH RH


    1. A01VL04

      Remove the 2 screws and disengage the clip.

    2. Pass the front seat outer belt through the slit in the center pillar upper garnish and remove the center pillar upper garnish.

  16. REMOVE CENTER PILLAR UPPER GARNISH LH

    Tech Tips

    Use the same procedure as for the RH side.

  17. REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

    Click here

  18. REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)

    Tech Tips

    Use the same procedure as for the RH side.

  19. REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)


    1. A01VG3Z

      Disengage the 2 clips and the 2 guides and remove the front pillar garnish.

    2. for 6 speakers:


      1. Disconnect the connector.

  20. REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)

    Tech Tips

    Use the same procedure as for the RH side.

  21. REMOVE NO. 2 ROOM LIGHT ASSEMBLY

    Click here

  22. REMOVE JACK HANDLE

  23. REMOVE REAR FLOOR FINISH PLATE

    Click here

  24. SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH


    1. A01VDSS

      Remove the bolt.

    2. Disengage the 2 claws and separate the rear seat 3 point type outer belt.

  25. SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side.

  26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


    1. A01VF9Y

      Remove the 3 screws.

    2. Disengage the 3 clips and the 3 claws and remove the deck trim side panel.

  27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side.

  28. REMOVE ROOF SIDE INNER GARNISH RH


    1. A01VL13

      Disengage the 5 clips.

    2. Pass the rear seat 3 point type outer belt through the slit in the roof side inner garnish and remove the roof side inner garnish.

  29. REMOVE ROOF SIDE INNER GARNISH LH

    Tech Tips

    Use the same procedure as for the RH side.

  30. REMOVE REAR ROOF SIDE RAIL GARNISH RH


    1. A01VHZO

      Disengage the 4 clips and remove the roof side rail garnish.

  31. REMOVE REAR ROOF SIDE RAIL GARNISH LH

    Tech Tips

    Use the same procedure as for the RH side.

  32. REMOVE VISOR ASSEMBLY RH


    1. A01VG34

      Remove the visor shaft from the visor holder.

    2. Remove the 2 screws and the visor.

  33. REMOVE VISOR ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side.

  34. REMOVE VISOR HOLDER

    Click here

  35. REMOVE ASSIST GRIP ASSEMBLY

    Click here

  36. REMOVE MAP LIGHT ASSEMBLY

    Click here

  37. REMOVE VANITY LIGHT ASSEMBLY (w/ Vanity Light)

    Click here

  38. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

    Click here

  39. REMOVE RAIN SENSOR COVER (w/ Rain Sensor)

    Click here

  40. SEPARATE REAR CENTER SEAT OUTER BELT ASSEMBLY

    Click here

  41. REMOVE ROOF HEADLINING ASSEMBLY (for Glass Roof)

    A01VJXSE02
    Text in Illustration
    *a Front Pillar RH Side *b Front Pillar LH Side
    *c Rear Pillar RH Side *d Windshield Glass Side

    1. for front pillar RH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 4 clamps.

    2. for front pillar LH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 4 clamps.

    3. for rear pillar RH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 3 clamps.

    4. for windshield glass side (w/ Rain Sensor):


      1. Disconnect the 2 connectors.

    5. Disengage the 2 claws.

    6. Using a clip remover, remove the clip.

    7. Disengage the 12 hook-and loop fasteners.

    8. A01VM77

      Remove the roof headlining from the vehicle through the back door as shown in the illustration.

      Note

      Do not damage the roof headlining assembly or body interior.

  42. REMOVE ROOF HEADLINING ASSEMBLY (except Glass Roof)

    A01VETEE02
    Text in Illustration
    *a Front Pillar RH Side *b Front Pillar LH Side
    *c Rear Pillar RH Side *d Windshield Glass Side

    1. for front pillar RH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 4 clamps.

    2. for front pillar LH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 4 clamps.

    3. for rear pillar RH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 3 clamps.

    4. for windshield glass side (w/ Rain Sensor):


      1. Disconnect the 2 connectors.

    5. Disengage the 2 claws.

    6. Using a clip remover, remove the 3 clips.

    7. Disengage the 2 hooks.

    8. A01VEQJ

      Remove the roof headlining from the vehicle through the back door as shown in the illustration.

      Note

      Do not damage the roof headlining assembly or body interior.