ПРИВОДНОЙ РЕМЕНЬ СНЯТИЕ


  1. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01IUIX

      Remove the 6 bolts and 10 clips.

    2. Remove the No. 1 engine under cover.

  2. REMOVE REAR ENGINE UNDER COVER RH


    1. A01IQ43

      Remove the 5 clips and under cover.

  3. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH


    1. A01INC5

      Выверните 4 болта и снимите правое усиление элемента передней подвески.

  4. REMOVE FAN AND GENERATOR V BELT


    1. A01IPA4E01

      Using SST and a 22 mm wrench, rotate the tensioner pulley counterclockwise to loosen the belt tension. Then remove the belt.

      SST
      09216-42010

      CAUTION:


      • Be careful as the wrench only fits loosely on the belt tensioner tool set point. The wrench may come off the set point and cause injuries.

      • Be careful that your hands do not become jammed between parts such as the belt, pulleys, etc.

      Note

      Make sure SST is installed as shown in the illustration. If not, SST and/or the belt may not be able to be removed.