REMOVE NO. 1 ENGINE UNDER COVER
Remove the 6 bolts and 10 clips.
Remove the No. 1 engine under cover.
REMOVE REAR ENGINE UNDER COVER RH
Remove the 5 clips and under cover.
REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH
Выверните 4 болта и снимите правое усиление элемента передней подвески.
REMOVE FAN AND GENERATOR V BELT
Using SST and a 22 mm wrench, rotate the tensioner pulley counterclockwise to loosen the belt tension. Then remove the belt.
CAUTION:
Be careful as the wrench only fits loosely on the belt tensioner tool set point. The wrench may come off the set point and cause injuries.
Be careful that your hands do not become jammed between parts such as the belt, pulleys, etc.
Note
Make sure SST is installed as shown in the illustration. If not, SST and/or the belt may not be able to be removed.