WASHER MOTOR INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. B005RF4C01
      B006DHE Install in this Direction
      B006AHR Washer hose
      B006EC9 Connector

      Install the windshield washer motor and pump assembly as shown in the illustration.

    2. Connect the connector.

    3. Connect the washer hose at the 2 points.

  2. INSTALL WASHER HOSE PROTECTOR


    1. B005VS3

      Install the washer hose protector with the 3 clips.

    2. B005R52

      Install the wire harness to the wire harness clamp.

  3. INSTALL WINDSHIELD WASHER JAR ASSEMBLY


    1. B005WGTC01
      B006DHE Install in this Direction(1)
      B006B42 Install in this Direction(2)

      Slide in the direction indicated by the arrow shown in the illustration and insert the guide.

      Tech Tips

      Push in the guide of the windshield washer jar assembly until it contacts the body installation.

    2. Temporarily install the windshield washer jar assembly with the 2 bolts.

    3. B005V8SC01
      B006AHR Bolt
      B006EC9 Connector

      Attach the claw and temporarily install the washer inlet with the bolt.

    4. Connect the 2 connectors.

    5. Attach the claw and temporarily install the No. 1 washer bracket with the bolt.

    6. Tighten the 4 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    7. B005SM3

      Attach the claw to connect the head light cleaner hose as shown in the illustration.

    8. B005UVF

      Connect the windshield washer hose assembly as shown in the illustration.

    9. Add washer fluid.

  4. INSTALL FRONT FENDER LINER LH


    1. B005UY6

      Temporarily install the front fender liner LH.

    2. Install the 5 screws.

    3. B005SKN

      Install the 3 clips.

    4. B005RM5

      Install the 2 screws and 7 clips.

    5. B005QXO

      Install the 5 screws.

  5. INSTALL FRONT FENDER WHEEL OPENING MOULDING LH


    1. B005TFZ

      Attach the claw to install the front fender wheel opening moulding LH.

  6. INSTALL ENGINE SIDE COVER LH


    1. B005UUA

      Attach the claw.

    2. Install the engine side cover LH with the 4 clips.

  7. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH


    1. B005VSE

      Install the front wheel opening extension pad LH with the 2 screws.

  8. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

  9. INSTALL TRANSMISSION UNDER COVER

    Click here

  10. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  11. INSTALL FRONT WHEEL

    Click here

  12. INSTALL FRONT FENDER REINFORCEMENT SUB-ASSEMBLY TOP LH

    Click here

  13. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here