REAR SEAT INNER BELT ASSEMBLY(for Fixed Seat Type) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL REAR SEAT INNER BELT ANCHOR BRACKET SUB-ASSEMBLY LH


    1. B006FCEC03
      *a Guide Pin

      Attach the guide pin and set the rear seat inner belt anchor bracket sub-assembly LH.

    2. Install the rear seat inner belt anchor bracket sub-assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL REAR SEAT INNER BELT ASSEMBLY LH


    1. B006EMZC04
      *a Guide
      *b Clamp
      B006AHR Bolt
      B006EC9 Connector

      Attach the clamp and connect the connector.

    2. Attach the guide.

    3. Install the rear seat inner belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. B006D90C02
      B006DHE Install in this Direction (1)
      B006B42 Install in this Direction (2)

      Attach the guide in the installation direction (1) shown in the illustration.

    5. Push in the installation direction (2) to attach the claw and install the protector of the rear seat inner belt assembly LH.

  3. INSTALL REAR SEAT INNER BELT ANCHOR BRACKET SUB-ASSEMBLY RH


    1. B0069PKC03
      *a Guide Pin

      Attach the guide pin and set the rear seat inner belt anchor bracket sub-assembly RH.

    2. Install the rear seat inner belt anchor bracket sub-assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  4. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH


    1. B006F09C05
      *a Guide
      *b Clamp
      B006AHR Bolt
      B006EC9 Connector

      Attach the clamp and connect the connector.

    2. Attach the guide.

    3. Install the rear seat inner with center belt assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. B006B41C01
      B006DHE Install in this Direction (1)
      B006B42 Install in this Direction (2)

      Attach the guide in the installation direction (1) shown in the illustration.

    5. Push in the installation direction (2) to attach the claw and install the protector of the rear seat inner with center belt assembly RH.

  5. INSTALL REAR SEATBACK HOLDER

    Click here

  6. INSTALL REAR SEATBACK ASSEMBLY

    Click here

  7. INSTALL NO. 1 SEAT ARMREST CAP

    Click here

  8. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  9. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here


    1. for 8GR-FKS:

      Click here

    2. for V35A-FTS:

      Click here

  11. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  12. INSPECT SRS WARNING LIGHT

    Click here

  13. INSPECT SEAT BELT WARNING SYSTEM


    1. w/ Occupant Classification System:

      Click here

    2. w/o Occupant Classification System:

      Click here

  14. INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

    Click here