AUXILIARY BATTERY REMOVAL

PROCEDURE


  1. PRECAUTION

    Note


    • After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

      Click here

  2. REMOVE BATTERY SERVICE HOLE COVER LH


    1. B004FH0

      Disengage the 5 claws and 4 guides to remove the luggage battery service hole cover LH.

  3. REMOVE LUGGAGE TRIM SERVICE HOLE COVER


    1. B004E1J

      Disengage the 4 claws to remove the luggage trim service hole cover.

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL


    1. Loosen the nut, and disconnect the cable from the negative (-) auxiliary battery terminal.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here

  5. REMOVE TIRE REPAIR SEAL


    1. B004G2H

      Disengage the 2 claws to disconnect the tool box band assembly.

    2. B004ENO

      Disengage the 2 guides and remove the tire repair seal from the battery clamp sub-assembly.

  6. REMOVE AUXILIARY BATTERY


    1. B004F90

      Disengage the 2 claws and open the battery terminal cap.

    2. Loosen the nut and disconnect the cable from the positive (+) auxiliary battery terminal.

    3. B004EQY

      Remove the nut and battery clamp sub-assembly.

    4. B004FSR

      Remove the bolt and battery hold down clamp sub-assembly.

    5. B004EHI

      Disconnect the battery hose from the auxiliary battery.

    6. Remove the auxiliary battery.