VACUUM SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Note

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

PROCEDURE

INSTALL E.F.I. VACUUM SENSOR ASSEMBLY
1. for Bank 2:
  1. Install the E.F.I. vacuum sensor assembly with the bolt.
    
    Torque:
    
    10 N*m { 102 kgf*cm, 7 ft.*lbf }
  2. Connect the No. 7 air hose to the E.F.I. vacuum sensor assembly.
  3. Connect the E.F.I. vacuum sensor assembly connector.
2. for Bank 1:
  1. Install the E.F.I. vacuum sensor assembly with the bolt.
    
    Torque:
    
    10 N*m { 102 kgf*cm, 7 ft.*lbf }
  2. Connect the No. 6 air hose to the E.F.I. vacuum sensor assembly.
  3. Connect the E.F.I. vacuum sensor assembly connector.
INSTALL LOWER RADIATOR AIR DEFLECTOR

Click here
INSTALL UPPER RADIATOR SUPPORT SEAL

Click here
INSTALL RADIATOR COVER PLATE

Click here
INSTALL V-BANK COVER SUB-ASSEMBLY

Click here