WIPER ECU INSTALLATION

PROCEDURE

1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY (for RHD)

   
   

   1. Attach the 2 claws to install the windshield wiper relay assembly.

2. INSTALL ECU INTEGRATION BOX RH (for RHD)

   Click here

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for RHD)

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (for RHD)

   Click here

6. INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

   Click here

7. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for RHD)

   Click here

8. INSTALL UPPER REAR CONSOLE PANEL (for RHD)

   Click here

9. INSTALL CONSOLE ARMREST ASSEMBLY (for RHD)

   Click here

10. INSTALL COWL SIDE TRIM BOARD RH (for RHD)

    Click here

11. INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here

12. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY (for LHD)

    
    

    1. Attach the 2 claws to install the windshield wiper relay assembly.

13. INSTALL ECU INTEGRATION BOX RH (for LHD)

    Click here

14. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

15. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

    Click here

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here