PARKING ASSIST ECU INSTALLATION

PROCEDURE


  1. INSTALL PARKING ASSIST ECU


    1. B0058AAC07
      *a Nut A
      *b Nut B
      B008H52 Connector

      Temporarily install a new nut (A) so that the nut cannot fall, but do not tighten it.

    2. Connect the 3 connectors.

    3. Insert nut (A) into the hole in the body and slide downward to temporarily install the parking assist ECU.

    4. Temporarily install a new nut (B).

    5. Tighten nut A and then nut B.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

  3. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  5. INSTALL ROPE HOOK ASSEMBLY

    Click here

  6. INSTALL UPPER DECK TRIM SIDE BOARD RH

    Click here

  7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

  8. INSTALL REAR FLOOR FINISH PLATE

    Click here

  9. INSTALL REAR SEAT ASSEMBLY


    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here

  10. PERFORM PANORAMIC VIEW MONITOR SYSTEM CALIBRATION

    Click here