REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. Engage the grommet.

    2. B004IR7C01
      *a Pin
      *b Guide
      B00847Z Install in this Direction

      Engage the 3 guides and pin to temporarily install the rear combination light assembly as shown in the illustration.

    3. Install the rear combination light assembly with the 2 screws.

    4. Remove the protective tape.

    5. Connect the connector.

  2. INSTALL REAR COMBINATION LIGHT COVER


    1. B004I1DC01
      B00847Z Engage in this Direction

      Engage the 2 claws as shown in the illustration.

    2. B004N3VC01
      B0089GN Area to Push
      B00847Z Install in this Direction

      Push the areas shown in the illustration in the direction indicated by the arrow to engage the 3 claws and install the rear combination light cover.

  3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH (for LH Side)

    Click here

  4. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH (for RH Side)

    Click here

  5. INSTALL REAR FLOOR FINISH PLATE

    Click here

  6. INSTALL LUGGAGE COMPARTMENT DOOR STRIKER COVER

    Click here

  7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  8. INSTALL SPARE WHEEL COVER TRAY

    Click here

  9. INSTALL SPARE WHEEL COVER ASSEMBLY

    Click here