CAUTION / NOTICE / HINT
CAUTION:
After installing the luggage compartment door support assembly, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.
PROCEDURE
INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY
Note
Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.
Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.
Do not apply any horizontal load to the luggage compartment door support assembly in order to prevent the piston rod from deforming.
Install in this Direction (1) | |
Install in this Direction (2) |
Engage the guide as indicated by the arrows, in the order shown in the illustration.
Engage the ball joint to install the luggage compartment door support assembly.
Note
Install the luggage compartment door support assembly while supporting the luggage door by hand.
Check that the ball joint is engaged securely and the luggage compartment door support assembly cannot be pulled off.
INSTALL LUGGAGE DOOR HINGE SUPPORT BUSH
Engage the 2 claws to install the luggage door hinge support bush.
Tech Tips
Use the same procedure for the RH side and LH side.
INSTALL BACK DOOR STAY SPRING
*a | Alignment Mark (Blue) |
Engage the 2 guides to install the back door stay spring.
Note
Make sure that the alignment mark (blue) is on the rear inner side.
Tech Tips
Use the same procedure for the RH side and LH side.
INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH
Engage the 2 fasteners to install the luggage compartment trim inner cover LH.
Install the 2 clips.
INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH
Engage the 2 fasteners to install the luggage compartment trim inner cover RH.
Install the 2 clips.
INSTALL REAR FLOOR FINISH PLATE
Install in this Direction |
Engage the 4 claws and 8 guides to install the rear floor finish plate as shown in the illustration.
Install the 4 clips.
INSTALL LUGGAGE COMPARTMENT DOOR STRIKER COVER
Install in this Direction |
Engage the 2 claws to install the luggage compartment door striker cover as shown in the illustration.
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
Engage the guide and claw to install the No. 1 luggage compartment trim hook.
Tech Tips
Use the same procedure for the RH side and LH side.
INSTALL SPARE WHEEL COVER TRAY
Install the spare wheel cover tray.
INSTALL SPARE WHEEL COVER ASSEMBLY
Install the spare wheel cover assembly.