CAMSHAFT POSITION SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE RADIATOR COVER PLATE

    Click here

  3. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  4. REMOVE LOWER RADIATOR AIR DEFLECTOR

    Click here

  5. REMOVE VVT SENSOR (for Intake Side of Bank 1)


    1. B006B6M

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  6. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)


    1. B006AZ5

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  7. REMOVE VVT SENSOR (for Intake Side of Bank 2)


    1. B006CGM

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  8. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)


    1. B006D52

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.