ROOF HEADLINING INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR NO. 2 SEAT SHOULDER BELT HANGER LH (w/ Rear No. 1 Seat, w/ Rear No. 2 Seat)

    A01ITMB

    1. Attach the claw and guide to install the rear No. 2 seat shoulder belt hanger.

  2. INSTALL REAR NO. 2 SEAT SHOULDER BELT HANGER RH (w/ Rear No. 1 Seat, w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR SEAT SHOULDER BELT HANGER LH (w/ Rear No. 1 Seat)

    A01ITMB

    1. Attach the claw and guide to install the rear seat shoulder belt hanger.

  4. INSTALL REAR SEAT SHOULDER BELT HANGER RH (w/ Rear No. 1 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL NO. 1 ROOF SIDE INNER GARNISH CAP (w/o Rear No. 1 Seat, w/o Rear No. 2 Seat)

    A01IRBC

    Tech Tips

    Use the same procedure for all the No. 1 roof side inner garnish caps.


    1. Attach the 2 claws to install the No. 1 roof side inner garnish cap.

  6. INSTALL REAR DECK TRIM CLIP (w/o Rear No. 1 Seat)

    A01IOOU

    Tech Tips

    Use the same procedure to install the rear deck trim clip on the other side.


    1. Attach the claw and guide to install the rear deck trim clip.

  7. INSTALL DECK SIDE TRIM COVER LH (w/o Rear No. 2 Seat)

    A01IQRY

    1. Install the deck side trim cover with the 2 screws.

  8. INSTALL DECK SIDE TRIM COVER RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL NO. 1 CUP HOLDER

    A01IQS6

    Tech Tips

    Use the same procedure to install the No. 1 cup holder on the other side.


    1. Attach the 3 claws and 2 guides to install the No. 1 cup holder.

  10. INSTALL DECK TRIM SIDE BELT HOLE COVER LH (w/o Rear No. 2 Seat)

    A01IMY3

    1. Slide the deck trim side belt hole cover in the direction indicated by the arrow in the illustration and attach the 2 claws and 6 guides to install it.

  11. INSTALL DECK TRIM SIDE BELT HOLE COVER RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  12. INSTALL NO. 1 DECK BOARD BRACKET LH (w/o Rear No. 2 Seat)

    A01IQC8

    1. Install the No. 1 deck board bracket with the 2 screws.

  13. INSTALL NO. 1 DECK BOARD BRACKET RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  14. INSTALL REAR NO. 3 SIDE RAIL SPACER LH (w/ Curtain Shield Airbag)

    A01ISOU

    1. Attach the 2 claws to install the rear No. 3 side rail spacer.

  15. INSTALL REAR NO. 3 SIDE RAIL SPACER RH (w/ Curtain Shield Airbag)

    Tech Tips

    Use the same procedure described for the LH side.

  16. INSTALL REAR NO. 2 SIDE RAIL SPACER LH (w/o Rear No. 2 Seat, w/o Curtain Shield Airbag)

    A01ITHF

    1. Attach the 2 claws to install the rear No. 2 side rail spacer.

  17. INSTALL REAR NO. 2 SIDE RAIL SPACER RH (w/o Rear No. 2 Seat, w/o Curtain Shield Airbag)

    Tech Tips

    Use the same procedure described for the LH side.

  18. INSTALL REAR SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)

    A01IT2P

    1. Attach the 4 claws to install the rear side rail spacer.

  19. INSTALL REAR SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

    Tech Tips

    Use the same procedure described for the LH side.

  20. INSTALL FRONT SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)

    A01IPI3

    1. Attach the 4 claws to install the front side rail spacer.

  21. INSTALL FRONT SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

    Tech Tips

    Use the same procedure described for the LH side.

  22. INSTALL SHOULDER BELT ANCHOR PLATE LH

    A01IQ75

    1. Attach the 5 claws and 3 guides to install the shoulder belt anchor plate.

  23. INSTALL SHOULDER BELT ANCHOR PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  24. INSTALL REAR DOOR SCUFF PANEL LH

    A01IRIX

    1. Attach the 5 claws and guide to install the rear door scuff panel.

  25. INSTALL REAR DOOR SCUFF PANEL RH

    Tech Tips

    Use the same procedure described for the LH side.

  26. INSTALL REAR DOOR SCUFF PLATE OUTSIDE LH

    A01IS0D

    1. Attach the 3 clips and 2 guides to install the rear door scuff plate outside.

  27. INSTALL REAR DOOR SCUFF PLATE OUTSIDE RH

    Tech Tips

    Use the same procedure described for the LH side.

  28. INSTALL FRONT DOOR SCUFF PLATE OUTSIDE

    A01IUQ0

    Tech Tips

    Use the same procedure to install the front door scuff plate outside on the other side.


    1. Attach the 3 clips and 2 guides to install the front door scuff plate outside.

  29. INSTALL ROOF HEADLINING ASSEMBLY

    A01ITZT

    Tech Tips

    Before installing the roof headlining, move the front seats and rear No. 1 seat to the positions shown in the illustration.


    1. A01IOFK

      Place the roof headlining into the vehicle through the back door.

      Note

      Be careful not to damage the roof headlining when placing it in the cabin.

    2. w/o Roof Sunshade System:


      1. Install the roof headlining with the 6 clips.

        A01IRZG

    3. w/ Roof Sunshade System:


      1. Attach the 2 guides and 11 fasteners to install the headlining.

      2. Install the 3 clips.

        A01IRQ8E01
        Text in Illustration
        *1 Guide *2 Fastener

    4. for LHD:


      1. A01IS4L

        Connect the 2 connectors and attach the 2 clamps.

    5. for RHD:


      1. A01IROK

        Connect the connector.

      2. A01IROG

        Connect the connector and attach the 2 clamps.

    6. A01IOUI

      Attach the 4 clamps to the front pillar LH.

    7. A01IU82E01

      Connect the 2 connectors and attach the clamp to the rear pillar RH.

    8. Install the bolt, and then align the No. 2 antenna cord with the cutout in the roof headlining and install the No. 2 antenna cord to the roof headlining.

      Text in Illustration
      *1 Roof Headlining Cutout
    9. A01ITMM

      Connect the connector and attach the 3 clamps to the front pillar RH.

    10. A01IUOR

      w/ Rain Sensor:

      Connect the rain sensor connector.

    11. A01IRIH

      w/ EC Mirror:

      Connect the EC mirror connector.

  30. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Install the instrument panel safety pad sub-assembly Click here.

  31. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

    A01IRUV

    1. Attach the 2 hinges to install the glove compartment door.

    2. A01IPRHE01

      Attach the glove compartment door stopper to the glove compartment door as shown in the illustration.

    3. While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the glove compartment door to engage the 2 stoppers.

      Text in Illustration
      *1 Stopper

  32. INSTALL FUSE BOX OPENING COVER (for LHD)

    A01IO2H

    1. for LHD:


      1. Connect the connectors.

      2. Attach the 6 clips and 4 claws to install the fuse box opening cover.

    2. for RHD:


      1. Connect the connectors.

      2. Attach the 5 clips and 4 claws to install the fuse box opening cover.

        A01IU2PE01

  33. INSTALL REAR ASSIST GRIP ASSEMBLY

    A01IOR5

    Tech Tips

    Use the same procedure for the other rear assist grip.


    1. Assemble the rear assist grip as shown in the illustration.

    2. A01ITAP

      Install the rear assist grip.

  34. INSTALL ASSIST GRIP ASSEMBLY

    A01IPSQ

    Tech Tips

    Use the same procedure for the other assist grip.


    1. Assemble the assist grip as shown in the illustration.

    2. A01ISPH

      Install the assist grip.

  35. INSTALL VISOR HOLDER

    A01IT0B

    Tech Tips

    Use the same procedure to install the visor holder on the other side


    1. Attach the 2 claws.

    2. Push in the visor holder as shown in the illustration.

  36. INSTALL VISOR ASSEMBLY LH

    A01IPDS

    1. Attach the 2 clips to install the visor.

  37. INSTALL VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  38. INSTALL RAIN SENSOR COVER (w/ Rain Sensor)


    1. A01IRSM

      Attach the 2 claws to connect the No. 1 rain sensor cover.

      Note

      Be careful not to damage the No. 1 rain sensor cover.

    2. A01INIG

      Attach the 3 claws to install the No. 1 rain sensor cover.

  39. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)


    1. A01IPI6

      Attach the 6 claws.

    2. A01IU7CE02

      Slide the inner rear view mirror stay holder cover in the direction indicated by the arrow in the illustration and attach the 2 claws to install it.

  40. INSTALL SEAT BELT ANCHOR COVER

    A01ISBX

    1. Attach the 2 claws to install the seat belt anchor cover.

    2. Install the 2 screws.

  41. INSTALL MAP LIGHT ASSEMBLY

    A01IUC0

    1. Connect the connector.

    2. Attach the 4 clips to install the map light.

  42. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

    A01IRBL

    1. Attach the 7 clips to install the inner roof side garnish.

    2. w/ Rear No. 1 Seat:


      1. A01IQVY

        Install the rear No. 1 seat belt shoulder anchor with the bolt.

        Torque:
        41 N*m  { 418 kgf*cm, 30 ft.*lbf }
      2. A01IPKK

        Attach the 2 claws to close the rear No. 1 seat belt shoulder anchor cover.

    3. w/ Rear No. 2 Seat:


      1. A01IRKY

        Install the rear No. 2 seat belt shoulder anchor with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }
      2. A01ITRU

        Attach the 2 claws to close the rear No. 2 seat belt shoulder anchor cover.

  43. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  44. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Connect the connector.

    2. Attach the 6 clips and 7 claws to install the deck trim side panel.

    3. Install the 2 bolts.

      A01ISVL
    4. A01IULD

      w/ Rear No. 1 Seat:

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    5. A01IRRR

      w/ Rear No. 2 Seat:

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  45. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Attach the 6 clips and 7 claws to install the deck trim side panel.

    2. Install the 2 bolts.

      A01ISDV
    3. A01IQEC

      w/ Rear No. 1 Seat:

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. A01IPQ5

      w/ Rear No. 2 Seat:

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  46. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    A01IUD8

    Tech Tips

    Use the same procedure for all the luggage hold belt strikers.


    1. Install the luggage hold belt striker with the bolt.

  47. INSTALL DECK TRIM SIDE SERVICE HOLE COVER

    A01IQ10

    Tech Tips

    Use the same procedure to install the deck trim side service hole cover on the other side.


    1. Attach the 4 claws and 2 guides to install the deck trim side service hole cover.

  48. INSTALL FRONT DECK SIDE TRIM COVER LH

    A01IUCE

    1. Attach the 2 claws to install the front deck side trim cover.

  49. INSTALL FRONT DECK SIDE TRIM COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  50. INSTALL CENTER PILLAR GARNISH LH

    A01IO55

    1. Pass the front seat outer belt floor anchor through the center pillar garnish.

    2. Attach the clip to install the center pillar garnish.

    3. Install the 2 screws.

    4. A01IS1B

      Install the front seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  51. INSTALL CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  52. INSTALL LAP BELT OUTER ANCHOR COVER

    A01IOX0

    Tech Tips

    Use the same procedure for the other lap belt outer anchor cover.


    1. Attach the 3 claws to install the lap belt outer anchor cover.

  53. INSTALL NO. 2 FLOOR BOARD


    1. Install the No. 2 floor board.

  54. INSTALL NO. 1 FLOOR BOARD


    1. Install the No. 1 floor board.

  55. INSTALL LOWER CENTER PILLAR GARNISH LH

    A01IUA8

    1. Attach the 2 claws and 2 clips to install the lower center pillar garnish.

  56. INSTALL LOWER CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  57. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    A01IP6WE01
    Text in Illustration
    *1 Paint Mark
    *2 Mark Position

    1. Align the paint mark on the rear door opening trim weatherstrip with the mark position on the vehicle and install the weatherstrip as shown in the illustration.

  58. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  59. INSTALL REAR DOOR SCUFF PLATE LH

    A01IQ4G

    1. Attach the 9 claws and 2 clips to install the rear door scuff plate.

  60. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  61. INSTALL FRONT PILLAR GARNISH LH

    A01IP42E01
    Text in Illustration
    *1 Front Pillar Garnish Clip
    *2 Protective Tape

    1. Remove the protective cover.

    2. Attach the 2 claws.

    3. Turn the end of the front pillar garnish clip 90° with needle-nose pliers and install it to the front pillar garnish.

      Tech Tips

      Tape the tips of the needle-nose pliers before use.

    4. A01ISQBE01
      *1 Front Pillar Garnish Clip

      Attach the 2 clips to install the front pillar garnish.

  62. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  63. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    A01IQCDE01
    Text in Illustration
    *1 Paint Mark
    *2 Mark Position

    1. Align the paint mark on the front door opening trim weatherstrip with the mark position on the vehicle and install the weatherstrip as shown in the illustration.

  64. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  65. INSTALL COWL SIDE TRIM BOARD LH

    A01ISRD

    1. Attach the 2 clips and guide to install the cowl side trim board.

  66. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  67. INSTALL FRONT DOOR SCUFF PLATE LH

    A01IPG9

    1. Attach the 8 claws and 2 clips to install the front door scuff plate.

  68. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  69. INSTALL REAR DECK TRIM COVER

    A01ITUG

    1. Attach the 6 claws and 4 guides to install the rear deck trim cover.

  70. INSTALL REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)


    1. Install the rear deck floor box.

      A01IO7TE01

  71. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)


    1. Place the rear No. 2 seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Temporarily install the 2 bolts.

      A01IUCV

    3. Pull the 2 straps and raise the 2 seatbacks.

    4. Temporarily install the 5 bolts.

      A01IRCI

    5. Tighten the bolts in the order shown in the illustration.

      A01IST0E01
      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    6. Connect the connector under the seat.

  72. INSTALL REAR NO. 2 SEAT TRACK COVER (w/ Rear No. 2 Seat)


    1. A01IOQC

      Attach the 2 guides and claw.

    2. Attach the 2 claws to install the cover.

  73. INSTALL REAR NO. 2 SEAT TRACK BRACKET COVER (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure to install the cover on the other side.


    1. A01IQ45

      Attach the 2 claws to install the cover.

  74. INSTALL DECK TRIM SIDE BELT HOLE COVER LH (w/ Rear No. 2 Seat)

    A01IRMT

    1. Slide the deck trim side belt hole cover in the direction indicated by the arrow in the illustration and attach the 2 claws and 6 guides to install it.

  75. INSTALL DECK TRIM SIDE BELT HOLE COVER RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  76. INSTALL DECK FLOOR BOX LH

    A01IU1X

    1. w/o Rear No. 2 Seat:


      1. Attach the 4 claws to install the deck floor box.

    2. A01IN2Q

      w/ Rear No. 2 Seat:


      1. Attach the 3 claws and guide to install the deck floor box.

      2. Install the bolt.

  77. INSTALL DECK FLOOR BOX RH

    A01ISZR

    1. w/o Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

    2. A01IPFF

      w/ Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

      2. Install the bolt.

  78. INSTALL LOWER DECK TRIM SIDE BOARD LH (w/o Rear No. 2 Seat)

    A01IN88

    1. Attach the claw and 2 guides to install the lower deck trim side board.

  79. INSTALL LOWER DECK TRIM SIDE BOARD RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  80. INSTALL DECK RAIL COVER (w/ Rear No. 2 Seat, w/o Spare Tire)

    A01IP10

    1. Attach the 2 claws and 2 guides to install the deck rail cover.

    2. Install the clip.

  81. INSTALL LUGGAGE COMPARTMENT TRAY (w/ Rear No. 2 Seat, w/ Spare Tire)

    A01ISB5

    1. Install the luggage compartment tray.

  82. INSTALL FRONT DECK FLOOR BOX (w/o Rear No. 2 Seat)

    A01INUT

    1. Install the front deck floor box with the 3 bolts.

  83. INSTALL DECK BOARD ASSEMBLY (w/ Rear No. 2 Seat)

    A01IRW6

    1. Attach the 4 claws and 6 clips to install the deck board.

  84. INSTALL NO. 2 DECK BOARD (w/o Rear No. 2 Seat)

    A01IUJ6

    1. Attach the 5 clips to install the No. 2 deck board.

  85. INSTALL NO. 1 DECK BOARD (w/o Rear No. 2 Seat)

    A01IO5W

    1. Install the No. 1 deck board.

  86. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    A01IUDC

    1. Install the tonneau cover.

  87. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.