Click here

AIR CONDITIONING PANEL (for Automatic Air Conditioning System) REMOVAL

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. for Automatic Air Conditioning System:


      1. Put protective tape around the instrument panel finish panel end.

        Table 1. Text in Illustration
        *1 Protective Tape

      2. Using a moulding remover, detach the 3 clips and 2 guides, and remove the instrument panel finish panel end.

    2. A01IQ6AE01

      for Manual Air Conditioning System:


      1. Put protective tape around the instrument panel finish panel end.

        Table 2. Text in Illustration
        *1 Protective Tape

      2. Using a moulding remover, detach the 3 clips and guide, and remove the instrument panel finish panel end.

  2. Click here

    REMOVE INSTRUMENT PANEL FINISH PANEL END RH


    1. for Automatic Air Conditioning System:


      1. Put protective tape around the instrument panel finish panel end.

        Table 3. Text in Illustration
        *1 Protective Tape

      2. Using a moulding remover, detach the 3 clips, claw and 2 guides, and remove the instrument panel finish panel end.

    2. A01IQX3E01

      for Manual Air Conditioning System:


      1. Put protective tape around the instrument panel finish panel end.

        Table 4. Text in Illustration
        *1 Protective Tape

      2. Using a moulding remover, detach the 3 clips, claw and guide, and remove the instrument panel finish panel end.

  3. Click here

    REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Detach the 8 claws and 4 guides.

    2. Disconnect the connector and remove the center instrument panel register.

  4. Click here

    REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio, for Radio and Display Type)


    1. Detach the 4 clips, 3 claws and 3 guides, and remove the center instrument cluster finish panel.

  5. Click here

    REMOVE STEREO OPENING COVER WITH BRACKET (w/o Audio)


    1. Remove the 4 bolts and stereo opening cover.

  6. Click here

    REMOVE RADIO RECEIVER WITH BRACKET (w/ Audio)


    1. for Radio Receiver Type:

      Remove the radio receiver assembly with bracket (Click here).

    2. for Radio and Display Type:

      Remove the radio receiver assembly with bracket (Click here).

  7. Click here

    REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01ISYGE01

      Twist the shift lever knob in the direction indicated by the arrow and remove it.

  8. Click here

    REMOVE POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)


    1. Detach the 5 claws and 3 clips.

    2. Disconnect the connector and remove the position indicator housing.

  9. Click here

    REMOVE SHIFTING HOLE COVER (for Manual Transaxle)


    1. Twist the T washer in the direction indicated by the arrow and remove it.

      Table 5. Text in Illustration
      *1 T Washer

    2. Remove the knob spring.

    3. Detach the 5 claws and 3 clips, and remove the shifting hole cover.

  10. Click here

    REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (except Manual Transaxle)


    1. for Automatic Air Conditioning System:


      1. Remove the 3 screws <C>.

      2. Detach the 2 claws, 4 clips and 5 guides, and remove the lower center instrument panel finish panel.

        Tip:

        If the 2 claws shown in the illustration are difficult to detach, detach the 4 clips of the air conditioning control and remove the lower center instrument panel finish panel together with the air conditioning control.

    2. A01IOIV

      for Manual Air Conditioning System:


      1. Remove the 3 screws <C>.

      2. Detach the 4 clips, 2 claws and 5 guides, and remove the lower center instrument panel finish panel.

  11. Click here

    REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)


    1. for Automatic Air Conditioning System:


      1. Remove the 2 screws <C>.

      2. Detach the 2 claws, 4 clips and 5 guides, and remove the lower center instrument panel finish panel.

        Tip:

        If the 2 claws shown in the illustration are difficult to detach, detach the 4 clips of the air conditioning control and remove the lower center instrument panel finish panel together with the air conditioning control.

    2. A01IN3V

      for Manual Air Conditioning System:


      1. Remove the 2 screws <C>.

      2. Detach the 4 clips, 2 claws and 5 guides, and remove the lower center instrument panel finish panel.

  12. Click here

    REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. Detach the 4 clips.

    2. Disconnect the connector and remove the air conditioning control.