FRONT AIRBAG SENSOR REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • w/ Navigation System (for HDD):

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE HEADLIGHT ASSEMBLY LH


    1. for Halogen Headlight:


      1. Remove the headlight Click here.

    2. for HID Headlight:


      1. Remove the headlight Click here.

  3. REMOVE FRONT AIRBAG SENSOR LH


    1. A01INL7

      Disconnect the connector.

    2. Remove the bolt and front airbag sensor.