NAVIGATION SYSTEM CD Sound Skips

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CHECK CD

   
   
   1. 

      Check the CD.

      OK
      The CD is clean.

      Note:

      Do not use a conventional record cleaner or antistatic preservative.

      Tip:

      If the CD is dirty, clean the CD by wiping the CD surface radially with a soft cloth.

   
   
   • OKClick here
   • NGClick here
2. Click here

   CHECK CD

   
   
   1. 

      Check that the CD is not deformed or cracked.

      OK
      No deformation or cracks on the CD

   
   
   • OKClick here
   • NGClick here
3. Click here

   CHECK OPERATION OF ANOTHER CD

   
   

   1. Check using another CD.

      
      

      1. Check if the problem recurs using another CD.

         OK
         The problem does not occur.

   
   
   • OKClick here
   • NGClick here
4. Click here

   CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

   
   

   1. Check the radio and display receiver assembly installation condition.

      
      

      1. Check that the radio and display receiver assembly is properly installed.

         OK
         The radio and display receiver assembly is properly installed.

   
   
   • OKClick here
   • NGClick here
5. Click here

   CLEAN CD

6. Click here

   CD IS FAULTY

7. Click here

   REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY

8. Click here

   REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLYClick here