CLUTCH UNIT (for 1AD-FTV, 2AD-FHV) REMOVAL

REMOVE MANUAL TRANSAXLE ASSEMBLY

1. for 1AD-FTV:

   Remove the manual transaxle assembly (Click here).

2. for 2AD-FHV:

   Remove the manual transaxle assembly (Click here).

REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

1. 

   Remove the clutch release fork with the clutch release bearing from the manual transaxle assembly.

REMOVE CLUTCH RELEASE BEARING ASSEMBLY

1. 

   Remove the clutch release bearing and clip from the clutch release fork.

REMOVE RELEASE FORK SUPPORT

1. 

   Remove the release fork support from the manual transaxle assembly.

   Tip:

   If there is adhesive on the threaded portion of the release fork support, replace a release fork support and clean the threaded potion of the housing.

REMOVE CLUTCH RELEASE FORK BOOT

1. 

   Remove the clutch release fork boot from the manual transaxle assembly.

REMOVE CLUTCH COVER ASSEMBLY

1. 

   Place matchmarks on the clutch cover and flywheel.

   Table 1. Text in Illustration

   *1

   Matchmark

2. Loosen each set bolt 180° at a time until the spring tension is released.

   Note:

   Be sure to uniformly loosen the bolts 180° at a time according to the order in the illustration.

3. Remove the set bolts and pull off the clutch cover to remove it.

   Note:

   Do not drop the clutch disc.

REMOVE CLUTCH DISC ASSEMBLY