REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
Remove the engine assembly with transaxle (Click here).
REMOVE REAR ENGINE MOUNTING INSULATOR
Remove the 3 bolts, 2 nuts and rear engine mounting insulator.
*a | for Manual Transaxle |
*b | for Automatic Transaxle |
REMOVE NO. 1 AIR TUBE
Loosen the hose clamp.
*a | for Manual Transaxle |
*b | for Automatic Transaxle |
Remove the 2 bolts and No. 1 air tube.
REMOVE STARTER ASSEMBLY
Disconnect the starter connector.
Open the terminal cap, remove the nut and disconnect the starter wire.
Remove the 2 bolts and starter.
REMOVE AIR TUBE SUPPORT
Remove the 2 bolts and air tube support.
REMOVE ENGINE WIRE
Disconnect the back-up light switch connector, remove the 2 bolts, detach the 3 clamps and remove the engine wire from the manual transaxle.
REMOVE OIL PAN INSULATOR
Remove the 2 bolts and oil pan insulator.
REMOVE STIFFENER PLATE LH
Remove the 4 bolts and stiffener plate LH.
REMOVE STIFFENER PLATE RH
Remove the 4 bolts and stiffener plate RH.
REMOVE MANUAL TRANSAXLE ASSEMBLY
Remove the 5 bolts and manual transaxle assembly from the engine.
REMOVE ENGINE MOUNTING BRACKET LH
Remove the 4 bolts and engine mounting bracket LH.
REMOVE FRONT ENGINE MOUNTING BRACKET
Remove the 3 bolts and front engine mounting bracket.
REMOVE REAR ENGINE MOUNTING BRACKET
Remove the 5 bolts and rear engine mounting bracket.