CLUTCH ACCUMULATOR (for 2AD-FHV) REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

  4. REMOVE FRONT LOWER BUMPER ABSORBER


    1. A01IOQE

      Remove the 2 clips.

    2. A01IPJ8

      Remove the 4 bolts.

    3. Detach the 2 hooks of the front lower bumper absorber from the installation holes in the body and remove the front lower bumper absorber.

  5. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01IRQL

      Remove the 6 bolts and 10 clips.

    2. Remove the No. 1 engine under cover.

  6. REMOVE BATTERY CLAMP SUB-ASSEMBLY


    1. A01IP71

      Remove the bolt and loosen the nut.

    2. Detach the hook of the battery clamp sub-assembly from the battery carrier, and then remove the battery clamp sub-assembly.

  7. REMOVE BATTERY INSULATOR

  8. REMOVE BATTERY

  9. REMOVE BATTERY TRAY

  10. REMOVE BATTERY CARRIER


    1. A01ISD1

      Detach the 2 clamps and disconnect the wire harness.

    2. Remove the 4 bolts and battery carrier.

  11. REMOVE CLUTCH ACCUMULATOR ASSEMBLY

    A01IRYT

    1. Using a union nut wrench, separate the clutch release cylinder to accumulator tube from the clutch accumulator assembly.

      Tech Tips

      Use a container to catch the fluid.

    2. Using a union nut wrench, disconnect the accumulator to flexible hose tube from the clutch accumulator assembly and flexible hose.

      Tech Tips

      Use a container to catch the fluid.

    3. Remove the bolt and accumulator to flexible hose tube from the clutch accumulator assembly.

    4. Remove the clip and separate the flexible hose from the clutch accumulator assembly.

    5. A01IQ2P

      Remove the 3 bolts and clutch accumulator assembly.