TCM INSTALLATION


  1. INSTALL TCM


    1. Install the TCM to the transaxle.

    2. A01ISIME01

      Install and tighten the 2 bolts in the order shown in the illustration.

      Torque:
      11 N*m  { 115 kgf*cm, 8 ft.*lbf }
    3. A01INXVE01

      Connect the connector to the TCM.

    4. Turn the lock lever until the claw of the connector makes a connection sound and secure the connector with the lock lever.

  2. INSTALL REAR ENGINE UNDER COVER LH


    1. Install the under cover with the 5 clips.

  3. INSTALL BATTERY CARRIER


    1. A01ISD1

      Install the battery carrier with the 4 bolts.

      Torque:
      19 N*m  { 189 kgf*cm, 14 ft.*lbf }

    2. Attach the 2 clamps to connect the wire harness.

  4. INSTALL BATTERY


    1. Install the battery tray.

    2. Install the battery.

    3. Install the battery clamp with the bolt and tighten the nut.

      Torque:
      for bolt
      17 N*m  { 168 kgf*cm, 12 ft.*lbf }
      for nut
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

    4. Connect the cable to the positive (+) battery terminal.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.