CRUISE CONTROL MAIN SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY


    1. A01ITOEE01
      Text in Illustration
      *1 Protective Tape

      Install the switch with the 2 screws.

    2. Connect the connector.

  2. INSTALL STEERING PAD


    1. A01INT0

      Support the steering pad with one hand.

    2. Connect the connector to the steering pad.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    3. Connect the horn connector.

    4. Attach the 2 springs to install the steering pad.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.