AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) Cellular Phone cannot Send/Receive

INSPECTION PROCEDURE

PROCEDURE

1. CHECK "BLUETOOTH" SETTINGS

   
   

   1. Check if the "Bluetooth" settings are correct.

      OK
      "Bluetooth" settings are correct.

   
   

   NG

   SET SETTINGS CORRECTLY

   OK

2. CHECK CELLULAR PHONE

   
   

   1. Check if the cellular phone is "Bluetooth" compatible.

      Tech Tips

      Some versions of "Bluetooth" compatible cellular phones may not function.

      OK
      Phone is "Bluetooth" compatible.

   
   

   NG

   END (ONLY A "BLUETOOTH" COMPATIBLE CELLULAR PHONE CAN BE USED)

   OK

3. CHECK SETTINGS

   Tech Tips

   The cellular phone is unable to call under any of the following conditions.

   
   

   • The cellular phone is locked.

   • The directory is being transferred.

   • There is a network error.

   • Transmission is regulated.

   • The power is off.

   • The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).

   
   

   1. Check that the cellular phone settings are set correctly.

      OK
      Cellular phone settings are set correctly.

   
   

   NG

   SET CORRECTLY

   OK

4. CHECK CELLULAR PHONE

   
   

   1. Check if the cellular phone can make a call.

      Tech Tips

      When the battery is low, calls cannot be made or received.

      OK
      Cellular phone can make a call.

   
   

   NG

   CELLULAR PHONE IS FAULTY

   OK

5. CHECK RECEPTION

   
   

   1. Set the cellular phone so that it can receive calls.

   2. Place the cellular phone close to the radio receiver assembly.

   3. Check the radio receiver to confirm that a "Bluetooth" connection exists between the radio and phone.

      OK
      Cellular phone has reception.

   
   

   NG

   REPLACE RADIO RECEIVER ASSEMBLY Click here

   OK

   PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here