Click here

VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:43

Click here
Click here Click here
DTC Code DTC Name
43 ABS Control System Malfunction
Click here

DESCRIPTION

This DTC is output when the VSC system detects a malfunction in the ABS.

DTC Code DTC Detection Condition Trouble Area
43 Malfunction in the anti-lock brake system. Anti-lock brake system
Click here

INSPECTION PROCEDURE

Note:

When replacing the skid control ECU (brake actuator assembly), perform the engine variant learning (Click here).

Click here

PROCEDURE


  1. Click here

    CHECK ANTI-LOCK BRAKE SYSTEM


    1. Clear the DTCs (Click here).

    2. Turn the ignition switch to ON.

    3. Check if an ABS DTC is output (Click here).

      Table 1. Result
      Result Proceed to
      DTC (ABS DTC) is not output. A
      DTC (ABS DTC) is output. B

  2. Click here

    RECONFIRM DTC


    1. Turn the ignition switch off.

    2. Clear the DTCs (Click here).

    3. Start the engine.

    4. Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.

    5. Check if the same DTC is output (Click here).

      Table 2. Result
      Result Proceed to
      DTC (43) is not output. A
      DTC (43) is output. B

  3. Click here

    USE SIMULATION METHOD TO CHECKClick here

  4. Click here

    REPAIR CIRCUIT INDICATED BY OUTPUT DTCClick here

  5. Click here

    REPLACE BRAKE ACTUATOR ASSEMBLYClick here